Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel

Nowadays, the application of high velocity oxy-fuel (HVOF) spraying is widely used in various industries. This is due to its ability to improve the wear, erosion and corrosion resistance of components. However, by taking consideration of mechanical properties and fatigue behaviour into cognisance, t...

Full description

Saved in:

Bibliographic Details
Main Author:	Moh Halmi, Mohamad Ariff
Format:	Thesis
Language:	English English English
Published:	2021
Subjects:	TA401-492 Materials of engineering and construction Mechanics of materials
Online Access:	http://eprints.uthm.edu.my/939/1/24p%20MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI.pdf http://eprints.uthm.edu.my/939/2/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20DECLARATION%20COPYRIGHT.pdf http://eprints.uthm.edu.my/939/3/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20WATERMARK.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uthm-ep.939
record_format	uketd_dc
spelling	my-uthm-ep.9392021-08-22T07:48:45Z Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel 2021-03 Moh Halmi, Mohamad Ariff TA401-492 Materials of engineering and construction. Mechanics of materials Nowadays, the application of high velocity oxy-fuel (HVOF) spraying is widely used in various industries. This is due to its ability to improve the wear, erosion and corrosion resistance of components. However, by taking consideration of mechanical properties and fatigue behaviour into cognisance, the consequence of the HVOF thermal spraying coating on the components remain debatable. In this research, the main objectives are to obtain the mechanical properties, investigate the fatigue behaviour and observe the microstructure of the uncoated and coated carbon steel. The morphology, chemical composition and the phase of the specimen were characterized using an optical microscope (OM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and x-ray diffraction (XRD). The microhardness of the specimen was tested with loads of 0.05 HV within dwell time of 10 s. Tensile test was carried out with a strain rate of 0.5 mm/min and a dog bone shaped specimen in accordance with ASTM-E8 standard. Fatigue test was performed under the stress ratio, R = -1 in accordance with ASTM-E466 by tension-compression cyclic loading (sine wave) with a frequency of 20 Hz. The results showed that the microhardness of the coated steel decreased by 40% and the yield strength of the coated steel decreased by 9.5% due to the increment of the substrate´s grain size resulting from the high HVOF flame temperature (2750 ˚C). The increment of coating thickness from 0.15 to 0.35 mm decreased the yield strength of the coated by 4.4% as due to the long-time exposure to high HVOF flame temperature. From the grit-blasting treatment, the embedment of the grit particles, cracks and notches on the substrate´s surface are the main reasons for the reduction of the tensile strength of the substrate by 9.1%. Similar behaviours are shown by the fatigue properties, as the HVOF coated steel showed a fatigue strength’s reduction of 17% due to the increment of the substrate’s grain size. These findings conclude that HVOF spraying process gives negative impact on the mechanical properties and fatigue properties. 2021-03 Thesis http://eprints.uthm.edu.my/939/ http://eprints.uthm.edu.my/939/1/24p%20MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI.pdf text en public http://eprints.uthm.edu.my/939/2/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20DECLARATION%20COPYRIGHT.pdf text en staffonly http://eprints.uthm.edu.my/939/3/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20WATERMARK.pdf text en validuser mphil masters Universiti Tun Hussein Onn Malaysia Faculty of Mechanical and Manufacturing Engineering
institution	Universiti Tun Hussein Onn Malaysia
collection	UTHM Institutional Repository
language	English English English
topic	TA401-492 Materials of engineering and construction Mechanics of materials
spellingShingle	TA401-492 Materials of engineering and construction Mechanics of materials Moh Halmi, Mohamad Ariff Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
description	Nowadays, the application of high velocity oxy-fuel (HVOF) spraying is widely used in various industries. This is due to its ability to improve the wear, erosion and corrosion resistance of components. However, by taking consideration of mechanical properties and fatigue behaviour into cognisance, the consequence of the HVOF thermal spraying coating on the components remain debatable. In this research, the main objectives are to obtain the mechanical properties, investigate the fatigue behaviour and observe the microstructure of the uncoated and coated carbon steel. The morphology, chemical composition and the phase of the specimen were characterized using an optical microscope (OM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and x-ray diffraction (XRD). The microhardness of the specimen was tested with loads of 0.05 HV within dwell time of 10 s. Tensile test was carried out with a strain rate of 0.5 mm/min and a dog bone shaped specimen in accordance with ASTM-E8 standard. Fatigue test was performed under the stress ratio, R = -1 in accordance with ASTM-E466 by tension-compression cyclic loading (sine wave) with a frequency of 20 Hz. The results showed that the microhardness of the coated steel decreased by 40% and the yield strength of the coated steel decreased by 9.5% due to the increment of the substrate´s grain size resulting from the high HVOF flame temperature (2750 ˚C). The increment of coating thickness from 0.15 to 0.35 mm decreased the yield strength of the coated by 4.4% as due to the long-time exposure to high HVOF flame temperature. From the grit-blasting treatment, the embedment of the grit particles, cracks and notches on the substrate´s surface are the main reasons for the reduction of the tensile strength of the substrate by 9.1%. Similar behaviours are shown by the fatigue properties, as the HVOF coated steel showed a fatigue strength’s reduction of 17% due to the increment of the substrate’s grain size. These findings conclude that HVOF spraying process gives negative impact on the mechanical properties and fatigue properties.
format	Thesis
qualification_name	Master of Philosophy (M.Phil.)
qualification_level	Master's degree
author	Moh Halmi, Mohamad Ariff
author_facet	Moh Halmi, Mohamad Ariff
author_sort	Moh Halmi, Mohamad Ariff
title	Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
title_short	Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
title_full	Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
title_fullStr	Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
title_full_unstemmed	Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
title_sort	effect of high velocity oxy-fuel (hvof) coatings on fatigue behaviour of carbon steel
granting_institution	Universiti Tun Hussein Onn Malaysia
granting_department	Faculty of Mechanical and Manufacturing Engineering
publishDate	2021
url	http://eprints.uthm.edu.my/939/1/24p%20MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI.pdf http://eprints.uthm.edu.my/939/2/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20DECLARATION%20COPYRIGHT.pdf http://eprints.uthm.edu.my/939/3/MOHAMAD%20ARIFF%20BIN%20MOH%20HALMI%20WATERMARK.pdf
_version_	1747830717509795840

Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel

Similar Items