Investigation on quality of hydroxyapatite adhesion on investment casting mould

Investigation on quality of hydroxyapatite adhesion on investment casting mould

Quality of Hydroxyapatite adhesion on investment casting mould was investigated in this project. Investment casting is a new method for HAp coating onto the metals. First stage of applying this method is making appropriate investment casting mould. Appropriate investment casting mould should have sp...

Saved in:

书目详细资料
主要作者:	Lotfabadi, Amir Fereidouni
格式:	Thesis
语言:	English
出版:	2008
主题:	TJ Mechanical engineering and machinery TS Manufactures
在线阅读:	http://eprints.utm.my/id/eprint/10017/1/AmirFereidouniLotfabadiMFKM2009.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Effect on adhesion quality of hydroxyapatite on investment casting mould
由: Mohamad Zulkifli, Mohd. Zulhafiz
出版: (2011)

Effect of oil palm fibre addition on the mechanical properties of shell mould investment casting
由: Soh, Wen Hann
出版: (2009)

Metal filling characteristics of aluminium lost foam casting
由: Wong, Yun Hong
出版: (2009)

Parametric Study for Runner Modification of Die Casted Part with Venting Systems
由: JASMINE ANAK, JENDIA
出版: (2023)

The effect of coconut dust addtion on the properties of green sand and investment casting moulds
由: S. Alyami, Saad Rabia
出版: (2010)

Hydroxyapatite coating on stainless steel 316L using investment casting technique
由: Suhasril, Andril Arafat
出版: (2016)

Effect oil palm fibre addition on the mechanical properties of shell mould investment casting
由: Soh, Wen Hann
出版: (2009)

Investigation of laser cutting parameters on surface quality of stainless steel
由: Anuar, Azman
出版: (2010)

Effect of heating temperatures and mould thickness on the geometry shape of in-situ melting magnesium investment casting
由: Abdul Razak, Siti Nur Faezah
出版: (2017)

Thermal analysis of a thin slab casting mould
由: Abas, Zakaria
出版: (2007)

Defect analysis on investment casting: a case study
由: Sabudin, Sulastri
出版: (2004)

Investigation of Finite Element Model of Futsal Ball and Simulation of its Impact Characteristics.
由: Fabian Halley Pata, Alban Dattu
出版: (2019)

Improvement on Test Piece Mould Design for High Pressure Die Casting
由: Tan, Ger Lian
出版: (2021)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
由: Lim, Syh Kai
出版: (2018)

Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment
由: Ramanathan, Geeva Raj
出版: (2009)

Processing and evaluation of an investment cast magnesium-base alloys
由: Idris, Mohd. Hasbullah
出版: (2001)

Evaluation of ABS patterns produced from FDM for investment casting
由: Wan Harun, Wan Sharuzi
出版: (2007)

Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V
由: Rashiddy Wong, Freddawati
出版: (2008)

Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes
由: Idris, Siti Rabiatull Aisha
出版: (2008)

Surface integrity of Inconel 718 during drilling operation
由: Farid, Ali Akhavan
出版: (2008)

An optimization of tin plating process using design of experiment
由: Lazim, Azrina
出版: (2008)

Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel
由: Farhana, Yasmin
出版: (2021)

Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing
由: Mohd Yazid, Abu
出版: (2016)

Classification of skateboarding tricks by synthesizing transfer learning models and machine learning classifiers using different input signal transformations
由: Muhammad Amirul, Abdullah
出版: (2022)

Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends
由: Che Wan Mohd Noor, Che Wan Othman
出版: (2019)

Simulated Kalman Filter algorithms for solving optimization problems
由: Nor Hidayati, Abdul Aziz
出版: (2019)

Study on the mechanical and wear properties of Mg/SiC/Gr hybrid metal matrix composite
由: Abdulqader Al-Maamari, Azzat Esam
出版: (2020)

Development of sustainability performance model for turning process by using neural network model
由: Hadi, Abdul Salaam
出版: (2020)

Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing
由: Mohd Azraai, Mohd Razman
出版: (2019)

Optimization of lubrication techniques on machining performance of aluminium alloy 319
由: Zainal Ariffin, Selamat
出版: (2018)

Design and development of thermodynamics apparatus using design for manufacture and assembly (DFMA) methodology
由: Wan Ibrahim, Wan Abd. Rahman Assyahid
出版: (2006)

Physical behaviour of powder ceramic part using cold isostatic pressing (CIP) processes
由: Md. Ani, Sarizal
出版: (2006)

Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel
由: Shamsudin, Zuraidy
出版: (2007)

Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061
由: Ahamed, Ahmad Fauzi
出版: (2010)

Design of a curry puff making machine
由: Ibrahim, Imran
出版: (2010)

Simulation of metal stamping for panel front door inner part for new automotive model development
由: Mesuan, Mohd. Ariffin
出版: (2010)

Software development of concurrent design for manufacturing process selection of plastic materials
由: Mohd. Yunus, Mohd. Yusri
出版: (2010)

Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA)
由: Mohamed Nazari, Munira
出版: (2010)

Computerized welding process selection and parameter determination
由: A. Aregia, Tarek Abdelhadi
出版: (2010)

Effect of process parameters on surface roughness produced by turning boring operation
由: Mohamed, Ahmad Dzia’Uddin
出版: (2010)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group