Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition

Magnesium (Mg) and its alloys have recently gained attention among researchers due to their excellent biodegradable and mechanical properties. However, poor corrosion resistance of Mg and its alloys have limited their clinical application. Rapid corrosion of Mg and its alloys may cause an implant fa...

وصف كامل

محفوظ في:

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Chong, Chin Yee
التنسيق:	أطروحة
اللغة:	English
منشور في:	2021
الموضوعات:	TJ Mechanical engineering and machinery
الوصول للمادة أونلاين:	http://eprints.utm.my/id/eprint/102120/1/ChongChinYeePSKM2021.pdf.pdf
الوسوم:	إضافة وسم لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!

id	my-utm-ep.102120
record_format	uketd_dc
spelling	my-utm-ep.1021202023-08-05T02:39:32Z Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition 2021 Chong, Chin Yee TJ Mechanical engineering and machinery Magnesium (Mg) and its alloys have recently gained attention among researchers due to their excellent biodegradable and mechanical properties. However, poor corrosion resistance of Mg and its alloys have limited their clinical application. Rapid corrosion of Mg and its alloys may cause an implant failed before the bone has fully restored. The aim of this research was to enhance corrosion resistance of biodegradable implant substrate that is suitable for biomedical applications. Multilayer coating of nano-powders HA/MgO were coated on AZ31 magnesium alloy substrate via electrophoretic deposition (EPD) technique. A coating was obtained by applying suitable EPD process parameters (applied voltage and deposition time) and coating approaches (single layer coating and multilayer coating). The results of coating behaviour were characterised by means of XRD, and SEM to examine the coating surface morphologies and their phases. Coating performances of HA, MgO, and HA/MgO coating were studied by immersion test, potentiodynamic test, and electrochemical impedance spectroscopy where all done in-vitro. Elemental analysis was carried out using EDS to verify that the composed elements are biodegradable and harmless to the human body. The results obtained in this research suggested that corrosion resistance of a coated sample was affected by its particles distribution structure. Particles distribution structure with higher compactness showed a homogeneous coating layer and smaller surface defects. In general, the multilayer coating approach has outperformed the single coating approach by demonstrating a higher compactness particle distribution structure. Corrosion results of each group were compared, and the optimum process parameters were determined. The optimum process parameters for single layer coating HA, MgO and HA/MgO were 2min/10V, 30V/1min, and 15V/1min, respectively. On the other hand, the optimum number of layers for multilayer coating HA, MgO and HA/MgO were 5 layers, 3 layers, and 2 layers, respectively. It was also found that composite coating of HA/MgO has successfully inherited the benefits and limitations of each coating powder. Furthermore, defects such as agglomeration and cracks were found significantly reduced to a lower degree in multilayer coating approach. Among all of the coated samples, Laco-HA/MgO 2 layers coated with 5V/10 min each layer showed the highest corrosion resistance. The significant improvement in inhibition efficiency achieved 99.76% against the uncoated AZ31. Based on these results, it was concluded that this sample has a great potential for biodegradable orthopaedic application. Lastly, it was recommended to conduct cell viability measurement, biological reaction, and cytotoxicity test on Laco-2 layers by biological field researchers in the future. 2021 Thesis http://eprints.utm.my/id/eprint/102120/ http://eprints.utm.my/id/eprint/102120/1/ChongChinYeePSKM2021.pdf.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:149190 phd doctoral Universiti Teknologi Malaysia Faculty of Engineering - School of Mechanical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Chong, Chin Yee Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
description	Magnesium (Mg) and its alloys have recently gained attention among researchers due to their excellent biodegradable and mechanical properties. However, poor corrosion resistance of Mg and its alloys have limited their clinical application. Rapid corrosion of Mg and its alloys may cause an implant failed before the bone has fully restored. The aim of this research was to enhance corrosion resistance of biodegradable implant substrate that is suitable for biomedical applications. Multilayer coating of nano-powders HA/MgO were coated on AZ31 magnesium alloy substrate via electrophoretic deposition (EPD) technique. A coating was obtained by applying suitable EPD process parameters (applied voltage and deposition time) and coating approaches (single layer coating and multilayer coating). The results of coating behaviour were characterised by means of XRD, and SEM to examine the coating surface morphologies and their phases. Coating performances of HA, MgO, and HA/MgO coating were studied by immersion test, potentiodynamic test, and electrochemical impedance spectroscopy where all done in-vitro. Elemental analysis was carried out using EDS to verify that the composed elements are biodegradable and harmless to the human body. The results obtained in this research suggested that corrosion resistance of a coated sample was affected by its particles distribution structure. Particles distribution structure with higher compactness showed a homogeneous coating layer and smaller surface defects. In general, the multilayer coating approach has outperformed the single coating approach by demonstrating a higher compactness particle distribution structure. Corrosion results of each group were compared, and the optimum process parameters were determined. The optimum process parameters for single layer coating HA, MgO and HA/MgO were 2min/10V, 30V/1min, and 15V/1min, respectively. On the other hand, the optimum number of layers for multilayer coating HA, MgO and HA/MgO were 5 layers, 3 layers, and 2 layers, respectively. It was also found that composite coating of HA/MgO has successfully inherited the benefits and limitations of each coating powder. Furthermore, defects such as agglomeration and cracks were found significantly reduced to a lower degree in multilayer coating approach. Among all of the coated samples, Laco-HA/MgO 2 layers coated with 5V/10 min each layer showed the highest corrosion resistance. The significant improvement in inhibition efficiency achieved 99.76% against the uncoated AZ31. Based on these results, it was concluded that this sample has a great potential for biodegradable orthopaedic application. Lastly, it was recommended to conduct cell viability measurement, biological reaction, and cytotoxicity test on Laco-2 layers by biological field researchers in the future.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Chong, Chin Yee
author_facet	Chong, Chin Yee
author_sort	Chong, Chin Yee
title	Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
title_short	Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
title_full	Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
title_fullStr	Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
title_full_unstemmed	Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
title_sort	corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition
granting_institution	Universiti Teknologi Malaysia
granting_department	Faculty of Engineering - School of Mechanical Engineering
publishDate	2021
url	http://eprints.utm.my/id/eprint/102120/1/ChongChinYeePSKM2021.pdf.pdf
_version_	1776100850515574784

Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition

مواد مشابهة