Load flow model for UPFC with ESS and ATC determination

Load flow model for UPFC with ESS and ATC determination

A load flow analysis is used for planning and to determine the transmission constraints in the existing networks. The load flow solution gives information about the magnitude and phase angle of the voltage at each bus and real and reactive power flows in each line for given generation, load and tran...

Saved in:

書目詳細資料
主要作者:	Salim, Norhafiz
格式:	Thesis
語言:	English
出版:	2009
主題:	TK Electrical engineering Electronics Nuclear engineering
在線閱讀:	http://eprints.utm.my/id/eprint/12004/6/NorhafizSalimMFKE2009.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Determination of ATC and security for power system using A1 technique
由: Abdul Gani, Ahmad Zhafri
出版: (2011)

Nonlinear Control Of Unified Power Flow Controller (UPFC) For Power System Stabilization
由: Hannon, Naeem
出版: (2009)

Optimal location of facts for ATC enhancement by using sensitivity analysis
由: Al Shaikh Salem, Raimon Omar
出版: (2013)

UPFC voltage stability technique assessment scheme
由: Ho, Rawnee Boon Chye
出版: (2008)

Risk-based avilable transfer capability (ATC) assessment including non-diaspatchable generation
由: Khosravifard, Mehran
出版: (2013)

Improvement of power quality using UPFC in a multi bus distribution system
由: Alipour, Ameneh
出版: (2015)

Load Flow Analysis And Planning Of Radial Distribution Systems- A New Approach Of Load Modelling, Load Forecasting And Feeder Planning
由: Chaturvedi, Ashvini
出版: (2007)

Genetic algorithms for load flow solution technique
由: Lok , Chin Woon
出版: (2004)

Load flow analysis uncertainty treatment via fuzzy arithmetic
由: Ayub, Zatul Akmar
出版: (2009)

Load flow analysis of power system with AC - DC link
由: Abd. Khalid, Saifulnizam
出版: (1999)

Load modelling and simulation of industrial and residential load for harmonic analysis
由: Mohamad, Mohamad Naim
出版: (2016)

Load flow studies of electrical power system using Newton-Raphson method / Zulhairi Abdul Razak
由: Abdul Razak, Zulhairi
出版: (1999)

Development of ultrasonic tomography for composition determination of water and oil flow
由: Ng, Wei Nyap
出版: (2005)

Sensitivity study on influencing parameters of transformer thermal model with directed oil flow
由: Nik Supian, Nik Mohd Azri
出版: (2013)

Control and modeling of active suspension system with load effect
由: Li, Jingsheng
出版: (2007)

Power system load flow analysis based on fast decoupled method using Microsoft Excel / Muhammad Azri Mohd Zawawi
由: Mohd Zawawi, Muhammad Azri
出版: (2014)

Dynamic load forecasting for commercial power network
由: Alzalet, Abdusalam Rajb
出版: (2014)

Modelling of small scale fluid flow in microfluidic device channel
由: Lee, Swee Tian
出版: (2010)

Two ways power flow with renewable energy integration
由: Sarnon, Mohd Zaki
出版: (2013)

Two way power flow in advance distributions and micro grid
由: Kamarudin, Mohd Khairul Shazril
出版: (2013)

Microprocessor Solder Bump Bridging Defects Screening Strategy In Manufacturing Test Flow
由: Loo , Kean Ann
出版: (2017)

Evolutionary Programming (EP) based technique for secure point identification with load shedding technique in power transmission / Abdul Rahman Minhat
由: Minhat, Abdul Rahman
出版: (2008)

Parallel unbalanced three-phase power flow analysis including distributed generation models
由: Syafii, Syafii
出版: (2011)

Analytical hierarchy approach for load shedding scheme: a case study based on the Johor System
由: Ling, Chak Ung
出版: (2012)

Imaging of solid flow in a gravity flow rig using infra-red tomography
由: Md. Yunus, Mohd. Amri
出版: (2005)

A comparative study of the AHP and TOPSIS methods for implementing load shedding scheme in a pulp mill system
由: Ibrahim, Zarina
出版: (2014)

Adaptive loading in MIMO OFDM system
由: Mohammed Musa, Mohammed Musa
出版: (2008)

Non-intrusive load management system for residential loads using artificial neural network based arduino microcontroller
由: Abubakar, Isiyaku
出版: (2018)

Real-time mass flow rate measurement for bulk solid flow using electrodynamic tomography system
由: Yaw, Wee Lee
出版: (2007)

Control of air-conditioning system for load management
由: Ahmad, Azmi
出版: (2019)

Effect of various load on power system protection
由: Ruihao, Sun
出版: (2012)

An optimal dynamic underfrequency load shedding scheme
由: Soomro, Dur Muhammad
出版: (2011)

Numerical study on engineering aspect of the cell geometries and flow channel design of Vanadium redox flow battery (V-RFB)
由: Suhailah, Sujali
出版: (2019)

Load distribution mesh routing for wireless mesh network
由: Ibrahim, Ismadi
出版: (2015)

Electricity load forecasting based on artificial intelligence techniques
由: Joshani, Majid
出版: (2010)

Short term load forecasting algorithm in transmission system
由: Ali Salem, Ibrahim Salem
出版: (2008)

Ultrasonic tomography for multiphase flow regime identification
由: Abdul Wahab, Yasmin
出版: (2009)

Predictive model of the occurrence of the earthquake
由: Salim, Mohd. Hayriel
出版: (2010)

Hard handover for load balancing in long term evolution network
由: Salawu, Nathaniel
出版: (2018)

An automatic load shedding scheme for titan petrochemical industrial plant
由: Krishnan, Chandran
出版: (2013)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group