Frequency reconfigurable log-periodic antenna design

The concept of reconfigurable antenna is widely used as additional features of reconfigurable ability for future wireless communication system. There are various configurations of reconfigurable antenna such as monopole, dipole and log-periodic wideband antenna. The integrations of reconfigurable an...

Full description

Saved in:

Bibliographic Details
Main Author:	Ismail, Muhammad Faizal
Format:	Thesis
Language:	English
Published:	2011
Subjects:	TK Electrical engineering Electronics Nuclear engineering
Online Access:	http://eprints.utm.my/id/eprint/28250/5/MuhammadFaizalIsmailMFKE2011.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.28250
record_format	uketd_dc
spelling	my-utm-ep.282502018-05-27T06:37:36Z Frequency reconfigurable log-periodic antenna design 2011-11 Ismail, Muhammad Faizal TK Electrical engineering. Electronics Nuclear engineering The concept of reconfigurable antenna is widely used as additional features of reconfigurable ability for future wireless communication system. There are various configurations of reconfigurable antenna such as monopole, dipole and log-periodic wideband antenna. The integrations of reconfigurable antennas with radio frequency (RF) switches are needed to perform the switchable ability. In this research, a logperiodic antenna (LPA) has been designed to perform a wideband frequency operation by connecting thirteen square-patch antennas using inset feed line technique. Then, the reconfigurable log-periodic antenna (RLPA) is designed by connecting positive-intrinsic-negative (PIN) diodes at every transmission lines with a quarter-wave length radial stub biasing. The representation of real PIN diodes and the locations of biasing circuits in simulation are also included. Three different subband frequencies with a bandwidth of 20% (3 - 4, 3.7 - 5, and 4.8 - 6 GHz for each band) are configured from the total of 73% bandwidth (3 to 6 GHz) of the wideband operations by switching ON and OFF of the PIN diode. Other sub-bands or narrow band can also be configured by selecting other group of patches. Validation for the LPA and RLPA is achieved by comparing the simulated and measured radiation patterns. The measured half-power beamwidth (HPBW) for LPA are 62°, 58° and 72° at frequency 3.4 GHz, 4.0 GHz and 5.8 GHz, respectively, while 73°, 67° and 72° for RLPA at the same frequency band. The simulated gain for LPA and RLPA are around 4.9 dB and 5.0 dB respectively, while the measured gain is around 5.5 dBi for LPA and 5.7 dBi for RLPA within a frequency range of 3 – 6 GHz. All the structures have been fabricated and the measurement results show accuracies of 97.5% for return loss, 80.2% for gain and 98.4% for HPBW with the simulation results. 2011-11 Thesis http://eprints.utm.my/id/eprint/28250/ http://eprints.utm.my/id/eprint/28250/5/MuhammadFaizalIsmailMFKE2011.pdf application/pdf en public masters Universiti Teknologi Malaysia, Faculty of Electrical Engineering Faculty of Electrical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TK Electrical engineering Electronics Nuclear engineering
spellingShingle	TK Electrical engineering Electronics Nuclear engineering Ismail, Muhammad Faizal Frequency reconfigurable log-periodic antenna design
description	The concept of reconfigurable antenna is widely used as additional features of reconfigurable ability for future wireless communication system. There are various configurations of reconfigurable antenna such as monopole, dipole and log-periodic wideband antenna. The integrations of reconfigurable antennas with radio frequency (RF) switches are needed to perform the switchable ability. In this research, a logperiodic antenna (LPA) has been designed to perform a wideband frequency operation by connecting thirteen square-patch antennas using inset feed line technique. Then, the reconfigurable log-periodic antenna (RLPA) is designed by connecting positive-intrinsic-negative (PIN) diodes at every transmission lines with a quarter-wave length radial stub biasing. The representation of real PIN diodes and the locations of biasing circuits in simulation are also included. Three different subband frequencies with a bandwidth of 20% (3 - 4, 3.7 - 5, and 4.8 - 6 GHz for each band) are configured from the total of 73% bandwidth (3 to 6 GHz) of the wideband operations by switching ON and OFF of the PIN diode. Other sub-bands or narrow band can also be configured by selecting other group of patches. Validation for the LPA and RLPA is achieved by comparing the simulated and measured radiation patterns. The measured half-power beamwidth (HPBW) for LPA are 62°, 58° and 72° at frequency 3.4 GHz, 4.0 GHz and 5.8 GHz, respectively, while 73°, 67° and 72° for RLPA at the same frequency band. The simulated gain for LPA and RLPA are around 4.9 dB and 5.0 dB respectively, while the measured gain is around 5.5 dBi for LPA and 5.7 dBi for RLPA within a frequency range of 3 – 6 GHz. All the structures have been fabricated and the measurement results show accuracies of 97.5% for return loss, 80.2% for gain and 98.4% for HPBW with the simulation results.
format	Thesis
qualification_level	Master's degree
author	Ismail, Muhammad Faizal
author_facet	Ismail, Muhammad Faizal
author_sort	Ismail, Muhammad Faizal
title	Frequency reconfigurable log-periodic antenna design
title_short	Frequency reconfigurable log-periodic antenna design
title_full	Frequency reconfigurable log-periodic antenna design
title_fullStr	Frequency reconfigurable log-periodic antenna design
title_full_unstemmed	Frequency reconfigurable log-periodic antenna design
title_sort	frequency reconfigurable log-periodic antenna design
granting_institution	Universiti Teknologi Malaysia, Faculty of Electrical Engineering
granting_department	Faculty of Electrical Engineering
publishDate	2011
url	http://eprints.utm.my/id/eprint/28250/5/MuhammadFaizalIsmailMFKE2011.pdf
_version_	1747815608117886976

Frequency reconfigurable log-periodic antenna design

Similar Items