Wear mechanism and surface integrity studies when turning hardened tool steel using wiper coated ceramic tool

Wear mechanism and surface integrity studies when turning hardened tool steel using wiper coated ceramic tool

Saved in:

书目详细资料
主要作者:	Umar, Alkali Adam
格式:	Thesis
出版:	2011
主题:	Unspecified
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Performance evaluation of wiper and conventional coated ceramic inserts when turning hardened tool steel
由: Affandi Mohd. Zainal, Affandi
出版: (2006)

Performance evaluation of wiper coated ceramic tool when hard turning tool steel
由: Saad Elmunafi, Mohamed Handawi
出版: (2010)

Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool
由: Kurniawan, Denni
出版: (2008)

Performance evaluation of coated ceramic cutting tools with T-land edge preparation when turning hardened tool steel
由: Wan Abdul Rahaman, Wan Emri
出版: (2006)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2003)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2004)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
由: Tang, Yu Cai
出版: (2006)

Performance evaluation of ceramic and PCBN cutting tools when turning hardened steel
由: Abd. Jamil, Saiful Bahri
出版: (2004)

Tool wear and tool life performance of TiA1N coated carbide cutting tools when turning XW 42 hardened tool steel
由: Effendy, Effendy
出版: (2007)

Evaluation of ceramic cutting tool performance when turning tool steels
由: Konneh, Mohamed
出版: (1998)

Performance of coolant strategies when turning hardened martensitic stainless steel using tialn coated carbide tool
由: Mohamed Elshwaini, Amad Elddein Issa
出版: (2017)

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
由: K. Seveen, K. Muniswaran
出版: (2007)

Performance evaluation of different edge geometry when turning hardened DF3 tool steel
由: Davoudinejad, Ali
出版: (2012)

Performance of cubic boron nitride and mixed ceramics tools when hard turning tool steel
由: Mohamad, Ahmad Kamely
出版: (2008)

Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide
由: Azhar, Anis Afuza
出版: (2019)

Effect of edge preparation when hard turning tool steel
由: Shaari, Mohd. Rosmani
出版: (2010)

cutting performance and wear of ZTA-TiO2-Cr03 mixed ceramic cutting tools when turning stainless steel 316L
由: Raqibah Najwa Binti Mudzaffar

Analyses of tool life and surface roughness during hard turning of AISI H13 hot work tool steel using mixed ceramic tools
由: Tan, Poh Lai
出版: (2003)

Optimization of cuting parameters for ceramic tool having different edge geometries in hard turning of tool steel /
由: Rohaizad Jamaludin
出版: (2015)

Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
由: Mazda, Nur Syahirah
出版: (2018)

Experimental investigations of cutting parameters influence on cutting forces, surface roughness and tool life when finish hard turning of Stavax ESR steel
由: Adamu, Gidado Bashir
出版: (2013)

A study of ceramic tool fracture in interrupted turning /
由: Husni
出版: (2010)

Surface integrity study when drilling inconel 718 using coated carbide tool
由: Kamaruzaman, Hasrul Shafiq
出版: (2011)

Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation
由: Abd Aziz, Syazxerlin
出版: (2018)

Neural networks prediction of cutting tool wear during turning operations /
由: Mahardika, Muslim
出版: (2005)

Performance and evaluation of graphite when machining hardened steel ASSAB 718
由: Saeed Ahmed, Radwan Ahmed
出版: (2009)

Wear Performance Of Concrete Mixture Paddles With Hardened Surfaces.
由: Chiong, Kung Kwong
出版: (2003)

Tool wear and tool life prediction while machining modular cast iron using ceramic tool /
由: Husni
出版: (1999)

Modelling of stagnant zone formation on diamond cutting tool when turning titanium alloy
由: Thet, Thet Mon
出版: (2007)

The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process
由: Juwara, Luqman Nul Hakim
出版: (2016)

Study of the effect of tool-workpiece vibration on tool wear and surface roughness /
由: Zhang, Wenbin
出版: (2001)

A study of laser transformation hardened DF2 tool steel specimens /
由: Yang, Lin Jiang
出版: (1993)

An investigation on the effects of AI2 O3 nanolubrication system with surfactant on tool wear and surface roughness in turning process

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
由: Haghighi, Hamidreza Shahabi
出版: (2008)

Evaluation of tool wear and machined surface integrity when drilling aluminium alloy 7075 under cold air and dry conditions
由: Nur Munirah Meera Mydin

Surface coatings for cutting tools /
由: Lim, Christina Yui Hung
出版: (1996)

Performance evaluation of powder metallurgy tool electrodes in electrical discharge machining of hardened steel /
由: Nik Masmiati Nik Pa
出版: (2006)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
由: Abd. Rahim, Erween
出版: (2005)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
由: Abd. Rahim, Erween
出版: (2005)

Machinability assessment when turning AISI 316L austenitic stainless steel using uncoated and coated carbide inserts
由: Nur, Rusdi
出版: (2016)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group