A case study on concrete problems in UTM

This Project was conducted to study the types of concrete problems and its basic category in UTM. The required information was gathered by conducting visual inspection to selected areas and buildings. Interviews with Pejabat Harta Bina and building custodian had made this survey easier when the requ...

Full description

Saved in:

Bibliographic Details
Main Author:	Julkarnain, Abdul Aziz
Format:	Thesis
Language:	English
Published:	2006
Subjects:	TA Engineering (General) Civil engineering (General)
Online Access:	http://eprints.utm.my/id/eprint/3876/1/AbdulAzizJulkarnainMFKE2006.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.3876
record_format	uketd_dc
spelling	my-utm-ep.38762018-01-11T00:50:14Z A case study on concrete problems in UTM 2006-05 Julkarnain, Abdul Aziz TA Engineering (General). Civil engineering (General) This Project was conducted to study the types of concrete problems and its basic category in UTM. The required information was gathered by conducting visual inspection to selected areas and buildings. Interviews with Pejabat Harta Bina and building custodian had made this survey easier when the required information available in their archive. By using fundamental knowledge in relating symptoms of defects to its causes, defects list and weightage of concrete problems based on percentage according to their basic category of cause i.e. Design Deficiency, Material Defect, Construction Error and Maintenance Defect, has been able to be developed and derived. The relationships were determined using approximate approach i.e. deducing initial failure hypotheses (IFH). From this survey, apparently based on the percentage, Design Deficiency has contributed the highest numbers of defective concrete in the survey, followed by Material Defect, Construction Error and Maintenance Defect, by, 34%, 30%, 26% and 10%, respectively. These data are further utilised by relating its causes to durability of the concrete structures in UTM. The results show that, regardless the root of reasons why concrete has became problematic; it has, for sure, given profound impact on the durability of concrete. For instance, crackings induced by design deficiency or by construction error at least permit access and ingress to aggressive agents to propagate deterioration process i.e. corrosion of reinforcement. With these information, it is hoped that the established platform on gathered information about concrete problems in UTM, may able to set forth preliminary reference for any purposes in relating to the above subject. Therefore, preventive measures can be set forth to avoid repetitive concrete problems in UTM in years to come. 2006-05 Thesis http://eprints.utm.my/id/eprint/3876/ http://eprints.utm.my/id/eprint/3876/1/AbdulAzizJulkarnainMFKE2006.pdf application/pdf en public masters Universiti Teknologi Malaysia, Faculty of Civil Engineering Faculty of Civil Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TA Engineering (General) Civil engineering (General)
spellingShingle	TA Engineering (General) Civil engineering (General) Julkarnain, Abdul Aziz A case study on concrete problems in UTM
description	This Project was conducted to study the types of concrete problems and its basic category in UTM. The required information was gathered by conducting visual inspection to selected areas and buildings. Interviews with Pejabat Harta Bina and building custodian had made this survey easier when the required information available in their archive. By using fundamental knowledge in relating symptoms of defects to its causes, defects list and weightage of concrete problems based on percentage according to their basic category of cause i.e. Design Deficiency, Material Defect, Construction Error and Maintenance Defect, has been able to be developed and derived. The relationships were determined using approximate approach i.e. deducing initial failure hypotheses (IFH). From this survey, apparently based on the percentage, Design Deficiency has contributed the highest numbers of defective concrete in the survey, followed by Material Defect, Construction Error and Maintenance Defect, by, 34%, 30%, 26% and 10%, respectively. These data are further utilised by relating its causes to durability of the concrete structures in UTM. The results show that, regardless the root of reasons why concrete has became problematic; it has, for sure, given profound impact on the durability of concrete. For instance, crackings induced by design deficiency or by construction error at least permit access and ingress to aggressive agents to propagate deterioration process i.e. corrosion of reinforcement. With these information, it is hoped that the established platform on gathered information about concrete problems in UTM, may able to set forth preliminary reference for any purposes in relating to the above subject. Therefore, preventive measures can be set forth to avoid repetitive concrete problems in UTM in years to come.
format	Thesis
qualification_level	Master's degree
author	Julkarnain, Abdul Aziz
author_facet	Julkarnain, Abdul Aziz
author_sort	Julkarnain, Abdul Aziz
title	A case study on concrete problems in UTM
title_short	A case study on concrete problems in UTM
title_full	A case study on concrete problems in UTM
title_fullStr	A case study on concrete problems in UTM
title_full_unstemmed	A case study on concrete problems in UTM
title_sort	case study on concrete problems in utm
granting_institution	Universiti Teknologi Malaysia, Faculty of Civil Engineering
granting_department	Faculty of Civil Engineering
publishDate	2006
url	http://eprints.utm.my/id/eprint/3876/1/AbdulAzizJulkarnainMFKE2006.pdf
_version_	1747814475627495424

A case study on concrete problems in UTM

Similar Items