Study of stress distribution in a cylinder using photo-elasticity method

Study of stress distribution in a cylinder using photo-elasticity method

The purpose of this study is to study the stress distribution in a cylinder using photo-elasticity method. The technique comprises from coating selection, design testing method, coating preparation and measure using photo-elastic camera. The coatings that been used were made from epoxy resin. Two di...

Saved in:

書目詳細資料
主要作者:	Rosli, Muhammad Firdaus
格式:	Thesis
出版:	2013
主題:	TA Engineering (General) Civil engineering (General)
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Manufacture of cylinders with axial imperfections
由: Khirotdin, Rd. Khairilhijra
出版: (2004)

Photo-degradation of renewable biopolymer blended with thermoplastic high density polyethylene (HDPE)
由: Sulong, Nurulsaidatulsyida
出版: (2022)

Elastic analysis of torsional buckling for portal frame structures
由: Nasri, Azzuana
出版: (2012)

The application of fluent 3D to simulate flow hydrodynamics around vertical cylinders
由: Seyedjalali, Jayad Taghinia
出版: (2009)

Determination of the influence of interface delamination on the elastic properties of fiber reinforced composite materials
由: Borghei, Seyed Nima
出版: (2013)

Vortex-induced vibration characteristics of two tandem spring supported cylinders with helical strakes
由: Mohd. Sukarnoor, Noor Idora
出版: (2022)

Estimating distribution parameters of extreme event using TL-moment method
由: Mat Jan, Nur Amalina
出版: (2014)

Horizontal shear stress contour mapping of composite slab by photostress method
由: Ahmad, Muhammad Fiaz
出版: (2008)

Pile capacity prediction by characteristic stress-wave method
由: Uddin Khaled, Md. Shahab
出版: (1997)

Agricultural water stress and risk assessment using integration of catastrophe theory and entropy methods
由: Ahammed, Sumaiya Jarin
出版: (2017)

Mathematical modelling of convective flow over a horizontal circular cylinder with convective boundary conditions in viscous, micropolar and nanofluid
由: Norhafizah, Md Sarif
出版: (2018)

Application of 2-dimensional digital image correlation for mapping bond strain and stress distribution in concrete
由: Aghlara, Reza
出版: (2010)

The application of finite element method in 2d heat distribution problems for irregular geometry
由: Ahmad Kailani, Nor Hafizah
出版: (2014)

Overcoming pressure deficiency in Sungai Rengit water distribution system
由: Mohd. Daud, Nur Firdaus
出版: (2009)

Measurement of liquid film flow on inclined wall using photochromic dye marking method
由: Nurrina, Rosli
出版: (2011)

Stress-Strain-Temperature Behaviour of Deposited Cemented Slurry
由: Ting`, Wee Kiet
出版: (2019)

Flood forecasting using semi-distributed hydrological model coupled with weather research and forecasting model
由: Zaidi, Syeda Maria
出版: (2019)

A study on stress-strain behaviour of granite and sandstone using closed-circuit servo-controlled testing machine
由: Abdullah, Rini Asnida
出版: (2006)

Stress concentration factor for tubular joints using LUSAS
由: Tan, Chin Thiam
出版: (2002)

Stress intensity factors of edge cracks in dissimilar joint plates
由: Nik Ismail, Nik Ainun
出版: (2014)

Optimal planning of photovoltaic distributed generation considering uncertainties using monte carlo pdf embedded MVMO-SH
由: Norhafidzah, Mohd Saad
出版: (2021)

An enhanced stress indices in signal processing based on advanced matthew correlation coefficient (MCCA) and multimodal function using EEG signal
由: Zarith Liyana, Zahari
出版: (2023)

Stress concentration factors for tubular joints using LUSAS software
由: Koay, Michael
出版: (2003)

Distribution of metals in fruits, vegetables and shellfish of Sabah
由: Muhammad Iqbal Hashmi
出版: (2002)

Simulation of river embankment stability : a case study on failure and remedial method at Muar River, Panchor, Johor
由: Hasan, Siti Norazela
出版: (2010)

Fabrication of cu2o based homostructure thin films using electrodeposition method
由: Mohamad Arifi, Nurliyana
出版: (2018)

Isogeometric analysis of plane stress structure
由: Chum, Zhi Xian
出版: (2015)

Vibrations and stress analysis of piping system
由: Abdullah, Mohd. Yunus
出版: (1996)

Performance of hot mix asphalt gradation using bailey method
由: Muhammad @ Munir, Samikhah
出版: (2009)

Slope strain monitoring using soil-embedded distributed optical fibre sensor
由: Awang Ismail, Dayangku Salma
出版: (2021)

Zinc oxide nanostructures: the effect of deposition parameters on the electrical properties using sol-gel method
由: Kamaruddin, Sharul Ashikin
出版: (2008)

The compressibility of fill subjected to applied stress and inundation
由: R. Alrowaimi, Mohamed Muftah
出版: (2006)

Stress analysis of cylindrical axisymmetric water tanks
由: Saw, Han Woei
出版: (2001)

Pile structural deformation using intrumented test pile with distributed fibre optic sensor
由: Tee, Bun Pin
出版: (2022)

Distributed hydrological model using machine learning algorithm for assessing climate change impact
由: Iqbal, Zafar
出版: (2022)

Streamflow modeling of a large arid catchment using semi-distributed hydrological model and modular neural network
由: Jajarmizadeh, Milad
出版: (2013)

Severity scoring approach using modified optical flow method and lesion identification for facial nerve paralysis assessment
由: Wan Syahirah, Wan Samsudin
出版: (2021)

Effects of stress-ratio on crack intensity in tunnel lining
由: Islam, Amber
出版: (2021)

Work-related stress among construction professionals in Yemen
由: Ali Bahutair, Abdullah Ahmed Mohammed
出版: (2020)

Tender evaluation using "cut-off" method
由: Nordin, Noorida Haswardani
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group