Mechanics of L-bending process for dual phase steel sheets
This work explores the mechanics of the sheet metal bending process using 1.2 mm-thick dual phase DP600 steel blanks .Bending process parameters were set with die radii of 3, 1.5 and 0.7 mm and die clearance of 1.2 mm .The applied punch speed is 5 mm/min. Finite element (FE) simulation of the L-bend...
Saved in:
主要作者: | Boroujeni, Sahar |
---|---|
格式: | Thesis |
出版: |
2013
|
主題: | |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
相似書籍
-
Electrodeposition of nickel/copper multi-nanolayer by dual bath technique at ambient temperature
由: Abdullah, Sharifah Sakinah
出版: (2017) -
The effect of substrate temperature of (Ti,A1)N coating on AISI 304L stainless steel and high speed steel using physical vapor deposition (PVD) method
由: Choo, Shyh Jing
出版: (2013) -
Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
由: Jasri, Mohamad
出版: (2013) -
New And Improved Versions Of Genetic And PSO Algorithms For A Class Of Hybrid Systems And Steel Annealing Process
由: Arumugam, M. Senthil
出版: (2008) -
Experimental analysis and optimization of coated and uncoated carbide tool in drilling aisi 316 L austenite stainless steel using minimum quantity lubrication technique
由: Mukhtar, Malik
出版: (2018)