Kajian semula analisis cerucuk pendek dalam pasir terhadap beban mendatar dengan kaedah unsur terhingga
The main aim of the research is to obtain a comparison for the short pile embedded in sand subjected to lateral load. The data from previous experiment which conducted by Chosun (1999) are used in comparing with Prokon Software. Prokon software is used for comparison analysis subjected to these expe...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Published: |
2002
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The main aim of the research is to obtain a comparison for the short pile embedded in sand subjected to lateral load. The data from previous experiment which conducted by Chosun (1999) are used in comparing with Prokon Software. Prokon software is used for comparison analysis subjected to these experimental results. Model pile of diameter 0.5m with an embedment ratio, L/D between 1 to 7 and pulling height ratio, e/L ranging from 1 to 7 for each embedment ratio were employed. For embedment ratio, L/D equal to 1, the maximum moment at ground level from the Prokon’s software is bigger than the experimental moment. These differences may cause from the effect of pulling arm in the pile model which result the sand failed earlier. Increasing in embedment ratio will reduce the differences from both results due to the effect of pulling arm is reducing. A comparison study indicate that Prokon software can be used to analyse short pile embedded in sand subjected to lateral load and for sure, this method will reduces both time and cost. |
|---|