An optimization of the plastic injection molding parameters for sport equipment by using doe methods
This thesis, research about the defect on plastic product in injection molding process. During producing a product using injection molding process, various of defects such as warpage, weld lines, shrinkage and sink mark can be occurred. A set of Optimal setting of injection molding parameters is...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | أطروحة |
| اللغة: | English |
| منشور في: |
2013
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://eprints.utm.my/id/eprint/48158/1/RadhwanHussinMFKM2013.pdf |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | This thesis, research about the defect on plastic product in injection molding
process. During producing a product using injection molding process, various of
defects such as warpage, weld lines, shrinkage and sink mark can be occurred. A set
of Optimal setting of injection molding parameters is very important to be
determined after various trials has been made, because to reduce and controlling the
quality on defect of the injection molded product. The purpose of this research is to
minimizing warpage and shrinkage defect on material Polycarbonate(PC)
thermoplastic and simulate the injection molding process using Moldflow Plastic
Insight software (MPI).Optical glasses has been selected as a product to be
studied and design the model by using Unigraphic NX 7.5. The approach based on
Design of Experiment (Taguchi Method) has been implemented to analyze and
optimize the processing parameters such as mold temperature, melt temperature,
packing time, packing pressure, cooling time, cooling temperature, and runner size.
Experimental plans available in the form of Orthogonal Arrays. Minitab Software
using for automatic experiments design and analysis of results based on Design of
Experiments (Taguchi Method) to find the best setting of injection molding plastic
part. |
|---|