Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering

In recent years, for hard coating material studies it was focused on particular coated components for drilling bit and cutting tools such as end mulls, drills and cutting inserts. Titanium nitride (TiN), which is widely used as a hard coating material, was coating on 304 stainless steel substrate ma...

Full description

Saved in:

Bibliographic Details
Main Author:	Sabar, Mustafa Muneim
Format:	Thesis
Language:	English
Published:	2013
Subjects:	TS Manufactures
Online Access:	http://eprints.utm.my/id/eprint/48188/1/MustafaMuneimSabarMFKM2013.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.48188
record_format	uketd_dc
spelling	my-utm-ep.481882017-08-29T02:47:06Z Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering 2013 Sabar, Mustafa Muneim TS Manufactures In recent years, for hard coating material studies it was focused on particular coated components for drilling bit and cutting tools such as end mulls, drills and cutting inserts. Titanium nitride (TiN), which is widely used as a hard coating material, was coating on 304 stainless steel substrate materials, because of excellent properties such as adhesion to substrates, high chemical inertness, resistance to elevated temperatures, hard surface (2400 HV) and low By comparison, TiAlN can significantly increase tool lifetime, therefore, it can reduce machine downtime and increases in productivity. In this study, Physical Vapour Deposition method (DC reactive Magnetron Sputtering) was used. This method is widely used for depositing hard coatings on subtract for tool applications. The effect of nitrogen pressure during deposition on microstructure, surface roughness and wear behavior of coating film for both targets was studied. The results FESEM analysis showed columnar structures were formed for both types of coating with thickness of 826.3 nm. From XRD analysis, for TiN the dominant growth plane is (111), whereas for TiAlN is (200). From three-dimensional AFM analysis it was indicated that surface roughness will increase as the N2 pressure increase. From multi pass scratch test analysis it was showed that the lowest friction and better wear resistance is at N2 pressure of 10sccm and 8sccm for TiN and TiAlN respectively. Friction coefficient of friction TiN shows limited oxidation resistance and may start to oxidize at temperature above 500 , therefore TiAlN become an alternative because it can be withstand at extreme temperature up to 800 2013 Thesis http://eprints.utm.my/id/eprint/48188/ http://eprints.utm.my/id/eprint/48188/1/MustafaMuneimSabarMFKM2013.pdf application/pdf en public http://libraryopac.utm.my/client/en_AU/main/search/results?qu=Effect+of+introgen+pressure+on+Ti&te= masters Universiti Teknologi Malaysia, Faculty of Mechanical Engineering Faculty of Mechanical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TS Manufactures
spellingShingle	TS Manufactures Sabar, Mustafa Muneim Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
description	In recent years, for hard coating material studies it was focused on particular coated components for drilling bit and cutting tools such as end mulls, drills and cutting inserts. Titanium nitride (TiN), which is widely used as a hard coating material, was coating on 304 stainless steel substrate materials, because of excellent properties such as adhesion to substrates, high chemical inertness, resistance to elevated temperatures, hard surface (2400 HV) and low By comparison, TiAlN can significantly increase tool lifetime, therefore, it can reduce machine downtime and increases in productivity. In this study, Physical Vapour Deposition method (DC reactive Magnetron Sputtering) was used. This method is widely used for depositing hard coatings on subtract for tool applications. The effect of nitrogen pressure during deposition on microstructure, surface roughness and wear behavior of coating film for both targets was studied. The results FESEM analysis showed columnar structures were formed for both types of coating with thickness of 826.3 nm. From XRD analysis, for TiN the dominant growth plane is (111), whereas for TiAlN is (200). From three-dimensional AFM analysis it was indicated that surface roughness will increase as the N2 pressure increase. From multi pass scratch test analysis it was showed that the lowest friction and better wear resistance is at N2 pressure of 10sccm and 8sccm for TiN and TiAlN respectively. Friction coefficient of friction TiN shows limited oxidation resistance and may start to oxidize at temperature above 500 , therefore TiAlN become an alternative because it can be withstand at extreme temperature up to 800
format	Thesis
qualification_level	Master's degree
author	Sabar, Mustafa Muneim
author_facet	Sabar, Mustafa Muneim
author_sort	Sabar, Mustafa Muneim
title	Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
title_short	Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
title_full	Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
title_fullStr	Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
title_full_unstemmed	Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
title_sort	effect of nitrogen pressure on ti /tia1 coating on 304 stainless steel by pvd-dc magnetron sputtering
granting_institution	Universiti Teknologi Malaysia, Faculty of Mechanical Engineering
granting_department	Faculty of Mechanical Engineering
publishDate	2013
url	http://eprints.utm.my/id/eprint/48188/1/MustafaMuneimSabarMFKM2013.pdf
_version_	1747817329204396032

Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering

Similar Items