Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions

Electro-Mechanical Dual Acting Pulley Continuously Variable Transmission (EMDAP CVT) is a transmission operated by electro-mechanical actuated system. It has a potential to reduce energy consumption where power is only needed during changing of CVT ratio and no additional power is needed to maintain...

Full description

Saved in:

Bibliographic Details
Main Author:	Budianto, Aries
Format:	Thesis
Language:	English
Published:	2014
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://eprints.utm.my/id/eprint/53440/25/AriesBudiantoMFKM2014.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.53440
record_format	uketd_dc
spelling	my-utm-ep.534402020-07-14T03:57:23Z Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions 2014-04 Budianto, Aries TJ Mechanical engineering and machinery Electro-Mechanical Dual Acting Pulley Continuously Variable Transmission (EMDAP CVT) is a transmission operated by electro-mechanical actuated system. It has a potential to reduce energy consumption where power is only needed during changing of CVT ratio and no additional power is needed to maintain the CVT ratio due to self-lock mechanism design feature of the EMDAP CVT. In this research, simulation of an EMDAP CVT model was first performed in order to evaluate controller system performance using MATLAB/Simulink software package. Then, confirmation of the simulation results is made by experimental data that is being measured from EMDAP CVT test rig. In order to obtain adequate performance, basic Proportional Integral Derivative (PID), Proportional Derivative (PD) and Proportional Derivative with Conditional Integral (PDCI) controller schemes were proposed to control EMDAP CVT ratio. Relay feedback and Ziegler-Nichols methods were utilized to tune the PID based controller parameters. From simulation analysis, the basic PID based controller shows a huge overshoot up to 280% and it takes very long settling time up to 65 seconds. However, this controller generates very small steady state error which is around 0.2%. The PD controller shows better performance where there is no overshoot occurred and faster settling time, i.e. 8 seconds, but steady state error is a bit higher, i.e. 3.2%, than the basic PID based controller. The best performance is predicted by PDCI controller where it shows maximum overshoot at 0.2%, 8 seconds in settling time and steady state error at 0.1%. In the experimental work, only PD and PDCI controller schemes are adopted because of their good control performance in the simulation. It is found that performance of the PD and PDCI controllers in the experiments are quite close to those predicted in the simulation. For the PD controller, experimental results show no overshoot, it takes only 4 seconds in settling time and produces steady state error of 10%. As for the PDCI controller, it shows 1% in maximum overshoot, 8 seconds in settling time and steady state error at 1%. This indicates that the PDCI controller is superior than the PD controller in terms of steady state error and this is confirmed by simulation and experimental results. 2014-04 Thesis http://eprints.utm.my/id/eprint/53440/ http://eprints.utm.my/id/eprint/53440/25/AriesBudiantoMFKM2014.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:85316 masters Universiti Teknologi Malaysia, Faculty of Mechanical Engineering Faculty of Mechanical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Budianto, Aries Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
description	Electro-Mechanical Dual Acting Pulley Continuously Variable Transmission (EMDAP CVT) is a transmission operated by electro-mechanical actuated system. It has a potential to reduce energy consumption where power is only needed during changing of CVT ratio and no additional power is needed to maintain the CVT ratio due to self-lock mechanism design feature of the EMDAP CVT. In this research, simulation of an EMDAP CVT model was first performed in order to evaluate controller system performance using MATLAB/Simulink software package. Then, confirmation of the simulation results is made by experimental data that is being measured from EMDAP CVT test rig. In order to obtain adequate performance, basic Proportional Integral Derivative (PID), Proportional Derivative (PD) and Proportional Derivative with Conditional Integral (PDCI) controller schemes were proposed to control EMDAP CVT ratio. Relay feedback and Ziegler-Nichols methods were utilized to tune the PID based controller parameters. From simulation analysis, the basic PID based controller shows a huge overshoot up to 280% and it takes very long settling time up to 65 seconds. However, this controller generates very small steady state error which is around 0.2%. The PD controller shows better performance where there is no overshoot occurred and faster settling time, i.e. 8 seconds, but steady state error is a bit higher, i.e. 3.2%, than the basic PID based controller. The best performance is predicted by PDCI controller where it shows maximum overshoot at 0.2%, 8 seconds in settling time and steady state error at 0.1%. In the experimental work, only PD and PDCI controller schemes are adopted because of their good control performance in the simulation. It is found that performance of the PD and PDCI controllers in the experiments are quite close to those predicted in the simulation. For the PD controller, experimental results show no overshoot, it takes only 4 seconds in settling time and produces steady state error of 10%. As for the PDCI controller, it shows 1% in maximum overshoot, 8 seconds in settling time and steady state error at 1%. This indicates that the PDCI controller is superior than the PD controller in terms of steady state error and this is confirmed by simulation and experimental results.
format	Thesis
qualification_level	Master's degree
author	Budianto, Aries
author_facet	Budianto, Aries
author_sort	Budianto, Aries
title	Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
title_short	Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
title_full	Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
title_fullStr	Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
title_full_unstemmed	Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
title_sort	microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions
granting_institution	Universiti Teknologi Malaysia, Faculty of Mechanical Engineering
granting_department	Faculty of Mechanical Engineering
publishDate	2014
url	http://eprints.utm.my/id/eprint/53440/25/AriesBudiantoMFKM2014.pdf
_version_	1747817555766018048

Microcontroller based ratio control for electromechanical dual acting pulley continuously variable transmissions

Similar Items