Adhesion of polymer coated steel wire by compression molding and extrusion process
Steel wires coated with thermoplastics have found a wider range of application in the field of science and engineering. However, steel-polymer interfaces frequently suffer from poor adhesion strength that is undermining their long-term stability under external stress because of weak interaction betw...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2015
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/53590/1/TijjaniAbdullahiMFKM2015.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-utm-ep.53590 |
---|---|
record_format |
uketd_dc |
spelling |
my-utm-ep.535902020-07-22T03:07:54Z Adhesion of polymer coated steel wire by compression molding and extrusion process 2015-08 Abdullahi, Tijjani TJ Mechanical engineering and machinery Steel wires coated with thermoplastics have found a wider range of application in the field of science and engineering. However, steel-polymer interfaces frequently suffer from poor adhesion strength that is undermining their long-term stability under external stress because of weak interaction between the steel and polymer surfaces. Therefore, the present study aims to investigate the influence of adhesive (Chemlok 213 and Cilbond 49SF) on the adhesion strength of galvanized and ungalvanized steel wire coating with thermoplastic polyurethane (TPU). Surface treatments including grinding with sandpaper, thermal oxidation and degreasing with alkaline solution were done on the steel wire substrate prior to coating by compression molding and extrusion process. The adhesion was characterized with a single wire pullout test and field emission scanning microscopy (FESEM). The experimental results confirmed that Cilbond 49SF adhesive with sandpaper grinding treated wire outperformed all other surface treatments tested. In comparison of the processes, compression molding process has an upper hand over the extrusion process because it provide an avenue for sufficient control of curing time required for optimum setting of the adhesive. 2015-08 Thesis http://eprints.utm.my/id/eprint/53590/ http://eprints.utm.my/id/eprint/53590/1/TijjaniAbdullahiMFKM2015.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:84936 masters Universiti Teknologi Malaysia, Faculty of Mechanical Engineering Faculty of Mechanical Engineering |
institution |
Universiti Teknologi Malaysia |
collection |
UTM Institutional Repository |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery Abdullahi, Tijjani Adhesion of polymer coated steel wire by compression molding and extrusion process |
description |
Steel wires coated with thermoplastics have found a wider range of application in the field of science and engineering. However, steel-polymer interfaces frequently suffer from poor adhesion strength that is undermining their long-term stability under external stress because of weak interaction between the steel and polymer surfaces. Therefore, the present study aims to investigate the influence of adhesive (Chemlok 213 and Cilbond 49SF) on the adhesion strength of galvanized and ungalvanized steel wire coating with thermoplastic polyurethane (TPU). Surface treatments including grinding with sandpaper, thermal oxidation and degreasing with alkaline solution were done on the steel wire substrate prior to coating by compression molding and extrusion process. The adhesion was characterized with a single wire pullout test and field emission scanning microscopy (FESEM). The experimental results confirmed that Cilbond 49SF adhesive with sandpaper grinding treated wire outperformed all other surface treatments tested. In comparison of the processes, compression molding process has an upper hand over the extrusion process because it provide an avenue for sufficient control of curing time required for optimum setting of the adhesive. |
format |
Thesis |
qualification_level |
Master's degree |
author |
Abdullahi, Tijjani |
author_facet |
Abdullahi, Tijjani |
author_sort |
Abdullahi, Tijjani |
title |
Adhesion of polymer coated steel wire by compression molding and extrusion process |
title_short |
Adhesion of polymer coated steel wire by compression molding and extrusion process |
title_full |
Adhesion of polymer coated steel wire by compression molding and extrusion process |
title_fullStr |
Adhesion of polymer coated steel wire by compression molding and extrusion process |
title_full_unstemmed |
Adhesion of polymer coated steel wire by compression molding and extrusion process |
title_sort |
adhesion of polymer coated steel wire by compression molding and extrusion process |
granting_institution |
Universiti Teknologi Malaysia, Faculty of Mechanical Engineering |
granting_department |
Faculty of Mechanical Engineering |
publishDate |
2015 |
url |
http://eprints.utm.my/id/eprint/53590/1/TijjaniAbdullahiMFKM2015.pdf |
_version_ |
1747817588886339584 |