Hydrogen adsorption on platinum doped activated carbon

Hydrogen energy system is expected to progressively replace the existing fossil fuels in the future. In particular, one potential use of hydrogen lies in powering zeroemission vehicles via a proton exchange membrane fuel cell (PEMFC). However, to make the PEMFC works on a vehicle, hydrogen storage i...

Full description

Saved in:

Bibliographic Details
Main Author:	Abd. Khari, Nurul Fatin
Format:	Thesis
Language:	English
Published:	2017
Subjects:	TP Chemical technology
Online Access:	http://eprints.utm.my/id/eprint/78382/1/NurulFatinAbdMFChE2017.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.78382
record_format	uketd_dc
spelling	my-utm-ep.783822018-08-26T04:56:17Z Hydrogen adsorption on platinum doped activated carbon 2017-03 Abd. Khari, Nurul Fatin TP Chemical technology Hydrogen energy system is expected to progressively replace the existing fossil fuels in the future. In particular, one potential use of hydrogen lies in powering zeroemission vehicles via a proton exchange membrane fuel cell (PEMFC). However, to make the PEMFC works on a vehicle, hydrogen storage is one of the critical components. When hydrogen is used on the vehicle, the equipment must has a high storage capacity. Carbon with high porosity and surface area as well as with the presence of metal loading were expected to obtain the maximum hydrogen adsorption via spillover effect on activated carbon (AC). The main objective of this research is to investigate the hydrogen adsorption on AC and platinum (Pt)-doped AC samples with different pressures (150, 250 and 350 psig). A comparative characterization was carried out using field emission scanning electron microscopy, x-ray diffraction and nitrogen adsorption isotherm analysis. It was shown that the presence of Pt metal reduced the surface area of AC from 675.32 m2.g-1 to 638.65 m2.g-1. Hydrogen adsorption at 150, 250 and 350 psig at room temperature exhibited two distinct behaviours. At 150 psig, the textural properties are critical and the adsorption capacities slightly increased with the Pt loading. On the contrary, at the higher pressure, the contribution of Pt nanoparticles was positive and marked by increased amounts of hydrogen reversibly adsorb from 0.7 to 0.9 wt.%. However, the amount of hydrogen uptake for Pt-doped AC was slightly lower compared to AC. AC adsorbed 1.07 wt.% of hydrogen at 350 psig compared to 0.9 wt.% for 10 wt.% Pt-doped AC. These findings have significant implications for the hydrogen storage in carbon-based materials, and further study needs to be done to enhance hydrogen uptake for Pt-doped AC. 2017-03 Thesis http://eprints.utm.my/id/eprint/78382/ http://eprints.utm.my/id/eprint/78382/1/NurulFatinAbdMFChE2017.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:105162 masters Universiti Teknologi Malaysia, Faculty of Chemical Engineering Faculty of Chemical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TP Chemical technology
spellingShingle	TP Chemical technology Abd. Khari, Nurul Fatin Hydrogen adsorption on platinum doped activated carbon
description	Hydrogen energy system is expected to progressively replace the existing fossil fuels in the future. In particular, one potential use of hydrogen lies in powering zeroemission vehicles via a proton exchange membrane fuel cell (PEMFC). However, to make the PEMFC works on a vehicle, hydrogen storage is one of the critical components. When hydrogen is used on the vehicle, the equipment must has a high storage capacity. Carbon with high porosity and surface area as well as with the presence of metal loading were expected to obtain the maximum hydrogen adsorption via spillover effect on activated carbon (AC). The main objective of this research is to investigate the hydrogen adsorption on AC and platinum (Pt)-doped AC samples with different pressures (150, 250 and 350 psig). A comparative characterization was carried out using field emission scanning electron microscopy, x-ray diffraction and nitrogen adsorption isotherm analysis. It was shown that the presence of Pt metal reduced the surface area of AC from 675.32 m2.g-1 to 638.65 m2.g-1. Hydrogen adsorption at 150, 250 and 350 psig at room temperature exhibited two distinct behaviours. At 150 psig, the textural properties are critical and the adsorption capacities slightly increased with the Pt loading. On the contrary, at the higher pressure, the contribution of Pt nanoparticles was positive and marked by increased amounts of hydrogen reversibly adsorb from 0.7 to 0.9 wt.%. However, the amount of hydrogen uptake for Pt-doped AC was slightly lower compared to AC. AC adsorbed 1.07 wt.% of hydrogen at 350 psig compared to 0.9 wt.% for 10 wt.% Pt-doped AC. These findings have significant implications for the hydrogen storage in carbon-based materials, and further study needs to be done to enhance hydrogen uptake for Pt-doped AC.
format	Thesis
qualification_level	Master's degree
author	Abd. Khari, Nurul Fatin
author_facet	Abd. Khari, Nurul Fatin
author_sort	Abd. Khari, Nurul Fatin
title	Hydrogen adsorption on platinum doped activated carbon
title_short	Hydrogen adsorption on platinum doped activated carbon
title_full	Hydrogen adsorption on platinum doped activated carbon
title_fullStr	Hydrogen adsorption on platinum doped activated carbon
title_full_unstemmed	Hydrogen adsorption on platinum doped activated carbon
title_sort	hydrogen adsorption on platinum doped activated carbon
granting_institution	Universiti Teknologi Malaysia, Faculty of Chemical Engineering
granting_department	Faculty of Chemical Engineering
publishDate	2017
url	http://eprints.utm.my/id/eprint/78382/1/NurulFatinAbdMFChE2017.pdf
_version_	1747817975584391168

Hydrogen adsorption on platinum doped activated carbon

Similar Items