Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes

Direct methanol fuel cell (DMFC) for portable power applications requires high power density and high-energy conversion efficiency which largely depends on membrane and electrocatalyst to achieve high performance. In improving these factors, the first objective of this study was to synthesize and ch...

وصف كامل

محفوظ في:

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Rosli, Siti Erlyane
التنسيق:	أطروحة
اللغة:	English
منشور في:	2015
الموضوعات:	TP Chemical technology
الوصول للمادة أونلاين:	http://eprints.utm.my/id/eprint/78543/1/SitiErlyyaneRosliMFPREE2015.pdf
الوسوم:	إضافة وسم لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!

id	my-utm-ep.78543
record_format	uketd_dc
spelling	my-utm-ep.785432018-08-27T03:24:17Z Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes 2015-09 Rosli, Siti Erlyane TP Chemical technology Direct methanol fuel cell (DMFC) for portable power applications requires high power density and high-energy conversion efficiency which largely depends on membrane and electrocatalyst to achieve high performance. In improving these factors, the first objective of this study was to synthesize and characterize sulfonatedpoly- ether-ether-ketone (SPEEK) and SPEEK/ charged surface modifying macromolecules (cSMM). The second objective was to synthesize and characterize Platinum/Ruthenium (Pt/Ru) catalyst for anode and Palladium (Pd) catalyst for cathode. Consequently, the third objective was to test the performance of SPEEK/cSMM using single cell DMFC under different catalyst loadings. In this work, 20 wt %, 30 wt % and 40 wt % Pt/Ru were used as the catalyst for anode while 5 wt % and 10 wt % Pd were used on the cathode, with three different loadings of 2, 4 and 6 mg/cm2, respectively for each 4 cm2-electrode. The electrodes were prepared using catalyzed diffusion media (CDM) method, while the membrane electrode assembly (MEAs) was prepared by hot pressing method. The single cell DMFC tests were run at constant condition of 100 ml min-1 air flowrate, 1M methanol concentration, 1 ml min-1 methanol flowrate and 60°C operating temperature, respectively. In finding the suitable catalyst loading in anode, commercial 40 wt % Pt electrode was used as the cathode. On the anode, it was found that the best result of catalyst loading was 30 wt % Pt/Ru with 4 mg/cm2, which then was used to get the suitable catalyst loading in cathode for 5 wt % and 10 wt % of Pd/Carbon. On the cathode, the best catalyst loading was 10 wt % Pd with 4 mg/cm2 loading. By applying the best loading of catalysts, the highest power density of 123 mW/cm2 was achieved, eventhough its open circuit voltage (OCV) and ohmic voltage yielded the lowest values. This shows that a combination of the best anode and cathode loading were able to generate the highest power density for SPEEK/cSMM electrolyte membrane for DMFC application. 2015-09 Thesis http://eprints.utm.my/id/eprint/78543/ http://eprints.utm.my/id/eprint/78543/1/SitiErlyyaneRosliMFPREE2015.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:105171 masters Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering Petroleum and Renewable Energy Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TP Chemical technology
spellingShingle	TP Chemical technology Rosli, Siti Erlyane Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
description	Direct methanol fuel cell (DMFC) for portable power applications requires high power density and high-energy conversion efficiency which largely depends on membrane and electrocatalyst to achieve high performance. In improving these factors, the first objective of this study was to synthesize and characterize sulfonatedpoly- ether-ether-ketone (SPEEK) and SPEEK/ charged surface modifying macromolecules (cSMM). The second objective was to synthesize and characterize Platinum/Ruthenium (Pt/Ru) catalyst for anode and Palladium (Pd) catalyst for cathode. Consequently, the third objective was to test the performance of SPEEK/cSMM using single cell DMFC under different catalyst loadings. In this work, 20 wt %, 30 wt % and 40 wt % Pt/Ru were used as the catalyst for anode while 5 wt % and 10 wt % Pd were used on the cathode, with three different loadings of 2, 4 and 6 mg/cm2, respectively for each 4 cm2-electrode. The electrodes were prepared using catalyzed diffusion media (CDM) method, while the membrane electrode assembly (MEAs) was prepared by hot pressing method. The single cell DMFC tests were run at constant condition of 100 ml min-1 air flowrate, 1M methanol concentration, 1 ml min-1 methanol flowrate and 60°C operating temperature, respectively. In finding the suitable catalyst loading in anode, commercial 40 wt % Pt electrode was used as the cathode. On the anode, it was found that the best result of catalyst loading was 30 wt % Pt/Ru with 4 mg/cm2, which then was used to get the suitable catalyst loading in cathode for 5 wt % and 10 wt % of Pd/Carbon. On the cathode, the best catalyst loading was 10 wt % Pd with 4 mg/cm2 loading. By applying the best loading of catalysts, the highest power density of 123 mW/cm2 was achieved, eventhough its open circuit voltage (OCV) and ohmic voltage yielded the lowest values. This shows that a combination of the best anode and cathode loading were able to generate the highest power density for SPEEK/cSMM electrolyte membrane for DMFC application.
format	Thesis
qualification_level	Master's degree
author	Rosli, Siti Erlyane
author_facet	Rosli, Siti Erlyane
author_sort	Rosli, Siti Erlyane
title	Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
title_short	Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
title_full	Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
title_fullStr	Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
title_full_unstemmed	Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
title_sort	effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes
granting_institution	Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering
granting_department	Petroleum and Renewable Energy Engineering
publishDate	2015
url	http://eprints.utm.my/id/eprint/78543/1/SitiErlyyaneRosliMFPREE2015.pdf
_version_	1747818011028357120

Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes

مواد مشابهة