Numerical investigation of impeller design variation on mechanical blood pump hemodynamics

Mechanical heart assist device is an emerging treatment for end-stages of heart failure which is an alternative to heart transplant due the shortage of heart donors. Despite the clinical success of “Left Ventricular Assist Devices (LVAD)”, the development still continue as new designs are progressiv...

Full description

Saved in:
Bibliographic Details
Main Author: Abdul Kadir, Muhammad Rashidi
Format: Thesis
Language:English
Published: 2017
Subjects:
Online Access:http://eprints.utm.my/id/eprint/78866/1/MuhammadRashidiAbdulMFBME2017.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utm-ep.78866
record_format uketd_dc
spelling my-utm-ep.788662018-09-17T07:15:44Z Numerical investigation of impeller design variation on mechanical blood pump hemodynamics 2017-04 Abdul Kadir, Muhammad Rashidi QH301 Biology Mechanical heart assist device is an emerging treatment for end-stages of heart failure which is an alternative to heart transplant due the shortage of heart donors. Despite the clinical success of “Left Ventricular Assist Devices (LVAD)”, the development still continue as new designs are progressively being tested to address the ever existing complications. Developing these blood pumps requires determining a balance in providing adequate pump performance while giving attention to possible occurrence of blood damage. This study utilized a proposed design concept of a hybrid bearing system and evaluate its’ merits of adapting the concept from a perspective of computational fluid dynamic (CFD) approach. Two design parameters were chosen for this study; the conical shape of the impeller bottom that functions to provide both radial and axial stability and secondly, the inclusion of a groove profile intended to complement the system as a hydrodynamic bearing as well as improving washout flow. Four model variations were constructed from the design parameters for comparison with the number of mesh between 8.9 to 9.8 million nodes. Menter’s Shear Stress Transport (SST) turbulent model was used to simulate 3 different operating speeds (2000 rpm, 3000 rpm, 4000 rpm) at 5 varying flowrate (3, 4, 5, 6, 7 L=min). Evaluation involved assessing the model variants based on several performance criteria. Ranked selection method was used to rate and select the better performing model variation with a good compromise between the level of blood damage potential (hemolysis index) and the pump performance although heavier emphasis on blood damage was chosen as a priority. In the analysis, CFD results showed that the inclusion of conical shape has negligible effect on pump head with a minor 0.8 percent difference, however it does present a potential area of stagnant flow, reducing washout by 28.3 percent. The groove profile along with conical shaped impeller present high shear stress region at the impeller bottom area that caused an increase in hemolysis index by an average of 15.4 percent. Ranking and selection of the model variants resulted in the flat groove configuration scored as the best performing configuration that gives the good compromise of pump performance and hemolysis. 2017-04 Thesis http://eprints.utm.my/id/eprint/78866/ http://eprints.utm.my/id/eprint/78866/1/MuhammadRashidiAbdulMFBME2017.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:110887 masters Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering Faculty of Biosciences and Medical Engineering
institution Universiti Teknologi Malaysia
collection UTM Institutional Repository
language English
topic QH301 Biology
spellingShingle QH301 Biology
Abdul Kadir, Muhammad Rashidi
Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
description Mechanical heart assist device is an emerging treatment for end-stages of heart failure which is an alternative to heart transplant due the shortage of heart donors. Despite the clinical success of “Left Ventricular Assist Devices (LVAD)”, the development still continue as new designs are progressively being tested to address the ever existing complications. Developing these blood pumps requires determining a balance in providing adequate pump performance while giving attention to possible occurrence of blood damage. This study utilized a proposed design concept of a hybrid bearing system and evaluate its’ merits of adapting the concept from a perspective of computational fluid dynamic (CFD) approach. Two design parameters were chosen for this study; the conical shape of the impeller bottom that functions to provide both radial and axial stability and secondly, the inclusion of a groove profile intended to complement the system as a hydrodynamic bearing as well as improving washout flow. Four model variations were constructed from the design parameters for comparison with the number of mesh between 8.9 to 9.8 million nodes. Menter’s Shear Stress Transport (SST) turbulent model was used to simulate 3 different operating speeds (2000 rpm, 3000 rpm, 4000 rpm) at 5 varying flowrate (3, 4, 5, 6, 7 L=min). Evaluation involved assessing the model variants based on several performance criteria. Ranked selection method was used to rate and select the better performing model variation with a good compromise between the level of blood damage potential (hemolysis index) and the pump performance although heavier emphasis on blood damage was chosen as a priority. In the analysis, CFD results showed that the inclusion of conical shape has negligible effect on pump head with a minor 0.8 percent difference, however it does present a potential area of stagnant flow, reducing washout by 28.3 percent. The groove profile along with conical shaped impeller present high shear stress region at the impeller bottom area that caused an increase in hemolysis index by an average of 15.4 percent. Ranking and selection of the model variants resulted in the flat groove configuration scored as the best performing configuration that gives the good compromise of pump performance and hemolysis.
format Thesis
qualification_level Master's degree
author Abdul Kadir, Muhammad Rashidi
author_facet Abdul Kadir, Muhammad Rashidi
author_sort Abdul Kadir, Muhammad Rashidi
title Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
title_short Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
title_full Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
title_fullStr Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
title_full_unstemmed Numerical investigation of impeller design variation on mechanical blood pump hemodynamics
title_sort numerical investigation of impeller design variation on mechanical blood pump hemodynamics
granting_institution Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering
granting_department Faculty of Biosciences and Medical Engineering
publishDate 2017
url http://eprints.utm.my/id/eprint/78866/1/MuhammadRashidiAbdulMFBME2017.pdf
_version_ 1747818090612129792