Design of rotor for internal batch mixer and mixing elements for twin screw extruder for polyolefin processing

Design of rotor for internal batch mixer and mixing elements for twin screw extruder for polyolefin processing

Mixing is the key component of polymer processing to achieve homogeneity of final product. Previous researchers have reported poor mixing performance of internal batch mixer (IBM) and twin screw extruder (TSE) due to improper distributive and dispersive mixings. This leads to poor product properties...

Saved in:

書目詳細資料
主要作者:	Salahudeen, Shafaat Ahmed
格式:	Thesis
語言:	English
出版:	2017
主題:	TP Chemical technology
在線閱讀:	http://eprints.utm.my/id/eprint/79512/1/ShafaatAhmedSalahudeenPFChE2017.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effect Of Counter-Rotating Twin Screw Extruder On The Physicochemical And Functional Properties Of Sago (Metroxylon Sagu) Starch
由: Bujang, Aisah
出版: (2007)

Polyamide 6 fibre recycling by twin-screw melt extrusion of mixed thermoplastic polymers
由: Kunchi Mon, Siti Zaharah
出版: (2019)

Investigation on reduction of a counter rotating twin screw extruder set up wastage for high temperature vulcanisation silicone rubber using six sigma methodology /
由: Marsita Mohd Pista
出版: (2010)

Reconditioning of waste polyolefin using dissolution/re- precipitation technique : a characterisation and modelling
由: Hadi, Arkan Jasim
出版: (2013)

Parametric modeling of twin rotor multi input multi output system
由: Abdul Aziz, Anis Fauzi
出版: (2009)

Characterization of oyster mushroom-soy protein meat analog using single-screw extruder with extrusion variables
由: Mohamad Mazlan, Mazween
出版: (2021)

Development of fish-based rice porridge using single-screw extruder / Noor Suhaina Abd Azis
由: Abd Azis, Noor Suhaina
出版: (2006)

An analysis of mixing characteristics in an extruder for quality improvement /
由: Tan, Swee Seng
出版: (1992)

Computational modeling of air-fuel mixer for natural gas powered motorcycle
由: Yeap, Beng Hi
出版: (2002)

Properties and morphological characterization of HDPE/kenaf/nanoclay composites by using single screw extruder / Mohamad Asnawi Ya'acob
由: Ya'acob, Mohamad Asnawi
出版: (2016)

An analysis of the viability of the Singapore petrochemical industry with particular emphasis on the polyolefin sector /
由: Lim, Kim Seng
出版: (1988)

Static mixer application in enhancing biogranules treatment through hydrodynamic shear force in sequencing batch reactor
由: Sulaiman, Suryati
出版: (2020)

An Improved Fuzzy Parallel Distributed –Like Controller for Multi-Input Multi-Output Twin Rotor System
由: Mahmoud, Thair Sh.
出版: (2009)

Production decision support system for batch processes
由: Chee, Lee Pheng
出版: (2017)

System identification and control of the horizontal motion of a twin rotor multi-input multi-output system (TRMS)
由: Abd. Aziz, Nurul Hazirah
出版: (2015)

Co-extruded triple layer hollow fiber solid oxide fuel cell using methane
由: Mohamed, Mohd. Hilmi
出版: (2019)

Co – extruded triple layer hollow fiber solid oxide fuel cell using methane
由: Mohamed, Mohd. Hilmi
出版: (2019)

Numerical simulation of mixing characteristics of CNG-air mixer for dual-fuel vehicle
由: Muhssen, Hassan Sadah
出版: (2016)

Synthesis of mass exhange network for batch process system
由: Foo, Chwan Yee
出版: (2002)

Inherent occupational health assessment for chemical batch processes
由: Nik Abd. Aziz, Nik Norashikin
出版: (2015)

Optimization Studies Of Batch Polymerization For Polystyrene Process
由: Azman, Nurshahida
出版: (2013)

Structural study of co-extruded dual-layer hollow fibre for micro-tubular solid oxide fuel cell
由: Ahmad, Siti Halimah
出版: (2016)

Effect of processing variables on the extruder characteristics /
由: Rozaidi Rashid
出版: (2000)

Design and operation of multivessel batch distillation
由: Anwaruddin, Hisyam
出版: (2012)

Dynamic Modeling And Optimization Of Batch Electrodialysis Process For Hydrochloric Acid Recovery
由: Rohman , Fakhrony Sholahudin
出版: (2009)

Optimisation of fed-batch fermentation process using deep reinforcement learning
由: Chai, Wan Ying
出版: (2023)

Melt pelletization in high shear mixer /
由: Zhu, Li
出版: (2000)

Synthesis of xylitol from meranti wood sawdust in batch process by locally produced xylose reductase
由: Islam, S. M. Rafiqul
出版: (2012)

Die system design with finite element for improving mechanical performance of extruded aluminium alloys and composites
由: Al-Jaryawy, Hani Mizhir Magid
出版: (2015)

Numerical pinch analysis for pressurised water reactor total site trigeneration system for continuous and batch processes
由: Jamaluddin, Khairulnadzmi
出版: (2021)

CFD modelling of multiphase flow in static mixer /
由: Viknesvaran Silverrajan
出版: (2020)

Active integrated antenna with image reject mixer
由: Chong, Wah Kiat
出版: (2006)

Development of a compressed natural gas (CNG) mixer for a two stroke internal combustion engine
由: Ramasamy, Devarajan
出版: (2005)

A Preliminary Study On Platelet Concentrates Quality Collected From Two Different Mixing Methods: Manual Mixing Versus Automated Blood Collection Mixer
由: Lim, Wen Siew
出版: (2017)

A study of butanol production in a batch oscillatory baffled bioreactor
由: N., Masngut
出版: (2013)

Enzymatic transesterification of palm olein and lauric acid in stirred batch reactor
由: Mohd Dom, Zanariah
出版: (2003)

Evaluation of optimal cooling control for seeded batch crystallization inclusive dissolution with uncertainties
由: Siti Zubaidah, Adnan
出版: (2020)

The kinetic performance of locally isolated immobilized phenol degrader in repeated batch culture
由: Misson, Mailin
出版: (2007)

The behavior of a batch and a continuous deodoriser for the deodorisation of Malaysian cocoa butter
由: Chik, Ahmad Sabri
出版: (2004)

The performance of an adsorptive recirculated packed bed batch reactor in the enzymatic synthesis of ampicillin
由: Lim, Chia Ching
出版: (2002)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group