Design for testability method at register transfer level

Design for testability method at register transfer level

The testing of sequential circuit is more complex compared to combinational circuit because it needs a sequence of vectors to detect a fault. Its test cost increases with the complexity of the sequential circuit-under-test (CUT). Thus, design for testability (DFT) concept has been introduced to redu...

Saved in:

書目詳細資料
主要作者:	Paraman, Norlina
格式:	Thesis
語言:	English
出版:	2016
主題:	TK Electrical engineering Electronics Nuclear engineering
在線閱讀:	http://eprints.utm.my/id/eprint/81731/1/NorlinaParamanPFKE2016.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

System-on-chip (SoC) testing using adhoc high-level design for-testability method
由: Cheng, Chen Kong
出版: (2009)

Register-transfer-level Hardware Trojan classification boosted with gate-level features
由: Choo, Hau Sim
出版: (2022)

Register-transfer level design of sum of absolute transformed difference for high efficiency video coding
由: Heh, Whit Ney
出版: (2018)

Register transfer level design of compression processor core using verilog hardware description language
由: Mohd. Sabri, Roslee
出版: (2007)

Software-based self-test with scan design at register transfer level for 16-bit RISC processor
由: Ang, Kim Chuan
出版: (2010)

Design for testability for complementary metal oxide semiconductor analog circuit to detect parametric variation of gate leakage
由: Ibrahim, Muhammad Faisal
出版: (2009)

Register Transfer Level Implementation Of Pooling - Based Feature Extraction For Finger Vein Identification
由: Mohamed Ali, Mohamed Hassan
出版: (2017)

8-bit Successive Approximation Register Analog-to-Digital (SAR ADC) logic design / Zuhaila Abdul Halim
由: Abdul Halim, Zuhaila
出版: (2006)

Enhanced configurable 2-d linear feedback shift register with maximal length
由: Wong, Kue Fong
出版: (2011)

Power transfer allocation using radial equivalent independent circuits method
由: Zeynal, Hossein
出版: (2007)

Optimal heat sink based on heat transfer model and particle swarm optimization method
由: Mohd. Hanafi, Mohd. Zainolarifin
出版: (2015)

Design of a modular asynchronous transfer mode multicast knockout switch architecture
由: Waqas, Muhammad
出版: (2000)

Analysis of FPGA design methods using AN 8 BIT ALU
由: Mohd Zin, Rosnah
出版: (2005)

High-level design and synthesis of VLSI cell placement algorithm
由: Yusoff, Othman Hanafi
出版: (2022)

A conceptual design of an alternative method for cutting off standby power consumption for office equipment
由: Tan, Kheng Wee
出版: (2012)

Optimal heat transfer of heat sink design based on electronic package thermal distribution using COMSOL package software
由: Rosli, Rashidah
出版: (2015)

Controller design based on Q-Parameterization method
由: Mohamad, Hussein Suleiman
出版: (2007)

Document summarization using transfer learning
由: Chong, Jing Wen
出版: (2018)

Operational flexibility for increasing renewable energy penetration level by modified enhanced priority list method
由: Abujarad, Saleh Y. I.
出版: (2018)

Heat transfer in switch / Muhamad Asraf Mohd
由: Mohd, Muhamad Asraf
出版: (2017)

Analysis of available transfer capability of transmission system
由: Abdul Hamid, Haziah
出版: (2002)

Determination of available transfer capability under dynamic condition
由: Twaha, Ssennoga
出版: (2012)

Multimedia application on asynchronous transfer mode (ATM) network
由: Abbas Shamsi, S. M. Zaheer
出版: (1999)

Location-assisted session transfer for VoIP applications
由: Abdul Wahab, Nur Haliza
出版: (2011)

The development of solar irriadiation levelling system using colour contour approach
由: Abd.Hadi, Faezah
出版: (2012)

Investigation of silicon nitride capping layer and embedded silicon germanium effect on 90 nm CMOS devices / Norlina Mohd Zain
由: Mohd Zain, Norlina
出版: (2010)

Compact circular polarization filtenna for wireless power transfer applications
由: Sabran, Mursyidul Idzam
出版: (2018)

Available transfer capability determination using artificial neural network
由: Habibuddin, Mohd. Hafiz
出版: (2003)

Active filter design to reduce the harmonics level generated by non linear load / Shahrul Azli Md Shah
由: Md Shah, Shahrul Azli
出版: (2005)

Field estimation of induction motor performance using dynamometer method and equivalent circuit method
由: Mohd Ariff, Mohd Hisyam
出版: (2008)

Resource allocation schemes for wireless asynchronous transfer mode (ATM) network
由: Alwi, Mohd. Fadel
出版: (2004)

Effect of gap lenghts of sphere-sphere electrodes on air breakdown level under lightning impulse
由: Hamzah, Ahmad Azlan
出版: (2014)

Dynamic leveling control of a wireless self-balancing ROV using fuzzy logic controller
由: Ayob, Mohammad Afif
出版: (2013)

New Approaches For The Assessment Of Power Transfer Capability In Interconnected Power Systems
由: Subramaniam Umapathy, Prabha
出版: (2010)

A compact S-band front-end rectenna for wireless power transfer application
由: Peranggi Pohan, Ikhwan
出版: (2006)

Energy forecast using linear regression methods
由: Hanafi, Noor Hasnizam
出版: (2004)

Effect of field utilization factor on air breakdown level under impulse lightning in point-sphere electrode system
由: Abdullah @ Abdul Rahman, Suhaimi
出版: (2014)

Liquid level sensing device
由: Maziyah, Mat Noh
出版: (2003)

Packet-level spam fingerprinting
由: Dahalan, Fazlida
出版: (2009)

Mid-range transformer based wireless power transfer system for low power devices
由: Leong, Kah Meng
出版: (2016)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group

Cannot write session to /tmp/vufind_sessions/sess_ir018g79n03er8k1rlpa3bejq6