DRY reforming of DRY reforming of methane over stabilized nickel-lanthanum supported on fibrous KCC-1 catalyst methane over stabilized nickel-lanthanum supported on fibrous KCC-1 catalyst
Dry reforming of methane (DRM) is a promising technology towards production of synthesis gas (syngas) with low H2:CO ratio by utilization of gases (CO2 and CH4) with potential to cause global warming. This study entails the development of highly active and stable nickel (Ni) based catalyst supported...
Saved in:
主要作者: | Abdulrahman, Abdulrasheed |
---|---|
格式: | Thesis |
语言: | English |
出版: |
2019
|
主题: | |
在线阅读: | http://eprints.utm.my/id/eprint/92400/1/AbdulrasheedAbdulrahmanPSChe2019.pdf.pdf |
标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
相似书籍
-
Dry reforming of methane over nickel-tantalum supported on fibrous ZSM-5 catalyst for production of synthesis gas
由: Hambali, Hambali Umar
出版: (2020) -
Lanthanum oxide-promoted cobalt catalyst supported on mesoporous alumina for syngas production via methane dry reforming
由: Tran, Ngoc Thang
出版: (2022) -
Production of syngas via dry reforming of methane with carbon dioxide over dolomite supported cobalt-based catalyst
由: Anuar, Arfaezah
出版: (2018) -
Nickel aluminide coating as catalyst in steam methane reforming microreactor
由: Sarwani, Muhamad Khairul Ilman
出版: (2017) -
Hydrogen production from acetic acid-phenol steam reforming over bimetallic nickel-cobalt supported on lanthanum oxide-gamma aluminum oxide catalyst
由: Nabgan, Bahador
出版: (2014)