Experimental study on hard turning of hardened tool steel with coated carbide cutting tools

Hard turning is a technique that can be used to substitute grinding in the finishing operations for hardened steel (HRC 45 and above). However, the use of this technique was limited due to high cost of the cutting inserts. The introduction of newly developed carbide cutting tools has made hard turni...

Full description

Saved in:

Bibliographic Details
Main Author:	K. Seveen, K. Muniswaran
Format:	Thesis
Language:	English
Published:	2007
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://eprints.utm.my/id/eprint/9441/1/MuniswaranSeveenFKM2007.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utm-ep.9441
record_format	uketd_dc
spelling	my-utm-ep.94412018-09-30T08:15:21Z Experimental study on hard turning of hardened tool steel with coated carbide cutting tools 2007-07 K. Seveen, K. Muniswaran TJ Mechanical engineering and machinery Hard turning is a technique that can be used to substitute grinding in the finishing operations for hardened steel (HRC 45 and above). However, the use of this technique was limited due to high cost of the cutting inserts. The introduction of newly developed carbide cutting tools has made hard turning more widespread. This study was undertaken to investigate the performance of KC 5010 which is a physical vapor deposition (PVD) titanium aluminium nitride (TiAlN) conventional geometry insert during finish hard turning of Stavax Electro-Slag-Refining (ESR) stainless tool steel (HRC 47 - 48). Various cutting speeds: 99.41, 130 and 170 m/min, and various feed rates: 0.098, 0.125 and 0.16mm/rev were employed. Turning was done under dry cutting condition and with constant depth of cut. Cutting forces, surface roughness and chip morphology were investigated. Results of surface roughness were satisfactory. Radial force seems to be the dominant force compared to the tangential force and feed force. Continuous chips were obtained regardless of the cutting conditions employed. Saw tooth chip formation was also found under high power microscope for all the cutting condition except at low cutting speed and feed. The radial force and surface roughness models were developed using the three level full factorial design. The mathematical models developed are statistically valid and sound, particularly for Fr and surface roughness. These are verified by the confirmation run experiments and therefore can be used for prediction within the limits of the factors investigated. Based on this research, hard turning with coated carbide inserts having conventional geometry performed satisfactory. 2007-07 Thesis http://eprints.utm.my/id/eprint/9441/ http://eprints.utm.my/id/eprint/9441/1/MuniswaranSeveenFKM2007.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:677?site_name=Restricted Repository masters Universiti Teknologi Malaysia, Faculty of Mechanical Engineering Faculty of Mechanical Engineering
institution	Universiti Teknologi Malaysia
collection	UTM Institutional Repository
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery K. Seveen, K. Muniswaran Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
description	Hard turning is a technique that can be used to substitute grinding in the finishing operations for hardened steel (HRC 45 and above). However, the use of this technique was limited due to high cost of the cutting inserts. The introduction of newly developed carbide cutting tools has made hard turning more widespread. This study was undertaken to investigate the performance of KC 5010 which is a physical vapor deposition (PVD) titanium aluminium nitride (TiAlN) conventional geometry insert during finish hard turning of Stavax Electro-Slag-Refining (ESR) stainless tool steel (HRC 47 - 48). Various cutting speeds: 99.41, 130 and 170 m/min, and various feed rates: 0.098, 0.125 and 0.16mm/rev were employed. Turning was done under dry cutting condition and with constant depth of cut. Cutting forces, surface roughness and chip morphology were investigated. Results of surface roughness were satisfactory. Radial force seems to be the dominant force compared to the tangential force and feed force. Continuous chips were obtained regardless of the cutting conditions employed. Saw tooth chip formation was also found under high power microscope for all the cutting condition except at low cutting speed and feed. The radial force and surface roughness models were developed using the three level full factorial design. The mathematical models developed are statistically valid and sound, particularly for Fr and surface roughness. These are verified by the confirmation run experiments and therefore can be used for prediction within the limits of the factors investigated. Based on this research, hard turning with coated carbide inserts having conventional geometry performed satisfactory.
format	Thesis
qualification_level	Master's degree
author	K. Seveen, K. Muniswaran
author_facet	K. Seveen, K. Muniswaran
author_sort	K. Seveen, K. Muniswaran
title	Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
title_short	Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
title_full	Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
title_fullStr	Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
title_full_unstemmed	Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
title_sort	experimental study on hard turning of hardened tool steel with coated carbide cutting tools
granting_institution	Universiti Teknologi Malaysia, Faculty of Mechanical Engineering
granting_department	Faculty of Mechanical Engineering
publishDate	2007
url	http://eprints.utm.my/id/eprint/9441/1/MuniswaranSeveenFKM2007.pdf
_version_	1747814731873255424

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools

Similar Items