Highway interchange simulation

This paper presents a real case study endeavor to apply highway interchange simulation distribution of vehicle movement by using modeling to review, assess, and improve the current traffic practices in Malaysia. First, building the implementation process diagram for a traffic modeling simulation and...

全面介紹

Saved in:
書目詳細資料
主要作者: Mohamed Balrwin, Rafeg Ali
格式: Thesis
語言:English
出版: 2008
主題:
在線閱讀:http://eprints.utm.my/id/eprint/9669/1/RafegAliMFKA2008.pdf
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This paper presents a real case study endeavor to apply highway interchange simulation distribution of vehicle movement by using modeling to review, assess, and improve the current traffic practices in Malaysia. First, building the implementation process diagram for a traffic modeling simulation and determine the flow sequence with vehicles quantity. Secondly, Time measurement for implementation processes and monitor, control the traffic flow which presented in three interchanges. Finally, the interchanges are presented from (Skudai to Johor Bahru) that needed to finish the overall traffic cycle time. Furthermore, the important parameters to build the simulation processes are vehicles quantity, lanes number and time factor. Therefore, the case study data were obtained in two stages: (i) during the morning period and (ii) during the evening period. Consequently, the data were collected with observation. The importance of traffic work flow in a developing country was clarified as time-based analysis, in which the completion cycle time of the highway project in the overall duration to vehicles were calculated separately by using Witness (2001) software. As a result the output is depended on the quantity of vehicles for each interchanges and time period by applying the simulation.