Development of a 6-dof 3D printed industrial robot for teaching and learning /

Development of a 6-dof 3D printed industrial robot for teaching and learning /

Saved in:

书目详细资料
主要作者:	Abdullahi, Adamu Yusuf (Author)
格式:	Thesis 图书
语言:	English
出版:	2019.
主题:	Three-dimensional printing. Robots > Kinematics. Robotics > Study and teaching. Robots > Control systems.
在线阅读:	http://studentsrepo.um.edu.my/11710/
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Design and development of hot press metal forming using KUKA robot /
由: Addam Paat
出版: (2013)

Visual servo control of 5 DOF Adept Robot /
由: Lin, Chunshu
出版: (2000)

Design and development of a snake robot with mixed mode locomotion /
由: Mad Helmi bin Ab Majid
出版: (2012)

Design of self-anchoring structure, optimized for 3D printing /
由: Churia Prakash Churiankamaran
出版: (2015)

Vision based servo control of a 3-dof robot /
由: Sundar Jawaharlal
出版: (1999)

Design and development of A 3-Degree of freedom parallel manipulator /
由: Ila, Lubabatu Baballe
出版: (2015)

Design of 6-DOF parallel manipulator motion control system based on robot operating system (ROS) /
由: Farooqi, Muhammad Awais
出版: (2017)

Vision based control of A 3-DOF manipulator /
由: Hu, Yamin
出版: (1997)

Design and control of a snake robot for narrow space application /
由: Watanabe, Mitsuru
出版: (2009)

Singularity avoidance, joint limits avoidance and driving joint torques minimization for three dimensional redundant planar manipulators /
由: Hadi, Samer Yahya
出版: (2012)

Development of an Adaptive Algorithm for Solving the Inverse Kinematics Problem for Serial Robot Manipulators
由: T. Hasan, Ali
出版: (2005)

An implementation of arduino microcontroller for 6-DOF robotic arm manipulator /
由: Wan Nizam Hakim Wan Sulaiman
出版: (2013)

Design and development of an online robot programming framework with robot operating system (ROS) /
由: Yeoh, Ru Sern
出版: (2019)

Control of planar flexible-link robots /
由: Yang, Hong
出版: (1999)

Kinematic and dynamic analysis of a hyper-redundant robotic manipulator with experimental verification /
由: Syed Masrur Ahhmad
出版: (2010)

Sensing stick towards autonomous navigation for a walking robot /
由: Lim, Howe Yuen
出版: (2001)

Designing powder deposition platform for 3D laser printing machine /
由: Dinesh Thiagarajah
出版: (2015)

Design and analysis of a 6-axis revolute joint robot /
由: Ng, Wan Sing
出版: (1989)

Intelligent control system of mobile robot /
由: Ruan, Zhilong
出版: (2001)

Design and implementation of a real-time adaptive learning algorithm controller for a 3-DOF parallel manipulator / Mustafa Jabbar Hayawi
由: Hayawi, Mustafa Jabbar
出版: (2015)

An optimized robotic path planner with a fuzzy PRM approach /
由: Chong, Xie Jze
出版: (2017)

A pragmatic approach to position based visual servoing of a robot /
由: Sim, Teck Ping
出版: (2002)

Collision prediction- based genetic network programming -reinforcement learning for mobile robot adaptive navigation in unknown dynamic environments
由: Mohammed, Ahmed Hassan
出版: (2017)

Omni-directional vision for navigation of a mobile robot /
由: Chew, Jouh Yeong
出版: (2010)

Development of behavior-based reactive navigation system for mobile robot
由: Mohd Hamami, Mohd Ghazali
出版: (2013)

Development of cost-effective 3D printed dental braces in orthodontics /
由: Oon, Ryan Yeehen
出版: (2020)

Robotics for arc welding / Mohd Ridzuan Rosli
由: Rosli, Mohd Ridzuan
出版: (2003)

Improved autonomous charging of mobile multi-robots using honeybee-inspired algorithm
由: Ahmad@Mohd Yusoff, Faisul Arif
出版: (2016)

Development of electromyography-controlled 3D printed robot hand and supervised machine learning for signal classification
由: Abdul Wahit, Mohamad Aizat
出版: (2019)

Design and Fabrication of Autonomous Entertainment Mobile Robot
由: Ishak, Asnor Juraiza
出版: (2003)

Active compliance control of an industrial robot /
由: Shetty, K. Bharathram
出版: (1994)

Development of a swarming algorithm for mobile robots
由: Humairah, Mansor

Path generation and optimization of a mobile robot using simulation /
由: Firsa, Teuku
出版: (2008)

Trajectory tracking control of self-balanced robot using PID-controller /
由: Zimit, Aminu Yahaya
出版: (2016)

Design and control of a 3 degree of freedom robot /
由: Raman, Saidapet Gokul Srinivasan
出版: (1998)

Development of printer nozzle for extruding synthetic biomaterials using fused deposition modeling process
由: Sukindar, Nor Aiman
出版: (2018)

Investigation of robotic welding process by using RobotStudio™5.10 and ABB robot / Shahfuan Hanif Ahmad Hamidi
由: Ahmad Hamidi, Shahfuan Hanif
出版: (2009)

Sensor based local path planning for mobile robot /
由: Liu, Chengqing
出版: (2000)

Design and development of an assembly robot manipulator /
由: Nagieb Fadl-Alla Elhag Hamad
出版: (2001)

Advanced controllers for robotic manipulators /
由: Zhu, Hai-An
出版: (1994)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group