Finite element analysis of pipe with localized flaw /

Finite element analysis of pipe with localized flaw /

Saved in:

書目詳細資料
主要作者:	Sim, Chen Nam
格式:	Thesis 圖書
語言:	English
出版:	1995.
主題:	Pipe, Steel > Corrosion > Measurement Finite element method. Strains and stresses > Measurement
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Non-linear finite element analysis of corrosion flaw in pipeline /
由: Zurina Ahmad
出版: (2012)

Tetrahedral meshing by finite element analysis for surface cracks with respect to corner point singularities for smooth and stepped round bars /
由: Teh, Sharon Ai Ping
出版: (2022)

Damage detection in corroded reinforced concrete beams using finite element modelling /
由: Noorli Ismail
出版: (2007)

Finite-element analysis to predict residual stress and strain in press-braked cold-formed steel section
由: Mutafi, Ayad Abdullah Mohammaed
出版: (2020)

Closed-form solution for stress intensity factors of semi-elliptical surface cracks with different inclinations in a cylinder bar under pure tension and pure torsion /
由: Ramezani, Mohammadkazem
出版: (2018)

Finite Element Analysis of Elastomeric Push Fit Spigot and Socket Steel Pipe Joint
由: Abdul Aziz, Nuraini
出版: (2000)

Experimental and computational study of stresses on outdoor piping of domestic air conditioner /
由: Loh, Yin Kuan
出版: (2012)

Determination of dynamic characteristic of helical gear using finite element analysis and modal testing / Mohd Izzuddin Yusof
由: Yusof, Mohd Izzuddin
出版: (2009)

Finite element modelling and updating for the dynamic behaviour of a structure with bolted joints / Rohaizat Omar
由: Omar, Rohaizat
出版: (2022)

A finite element analysis of residual stress in brazing of sapphire and inconel /
由: Chan, Chow Khuen
出版: (2011)

Effect of forming speeds on coil-break formation during uncoiling of fully annealed low carbon steel sheets-a 3D finite element simulation study /
由: Kam, Weng Joe
出版: (2022)

Finite element method for beam bending problem /
由: Sarah A'fifah binti Abdullah Sani
出版: (2012)

Finite Element Modeling Of Ballistic Penetration into Fabric Armor
由: Talebi, Hossein
出版: (2006)

Nonlinear finite element analysis of integral bridge including foundation soil interaction
由: Md. Noh, Mohammad Soffi
出版: (2006)

Finite element analysis of a lightweight box structure / Mohd Amir Bohari
由: Bohari, Mohd Amir
出版: (2003)

Finite element analysis of triangular elements /
由: Wan Hamidon Wan Badaruzzaman
出版: (1986)

Prediction of structural response of distressed bridge using finite element method
由: Krishna, Shreeram
出版: (2004)

Finite element analysis of Nitinol stent (application in thoracic aorta) / Ahmad Faizul Fahmi Mohd
由: Mohd, Ahmad Faizul Fahmi
出版: (2010)

Finite Element Simulation and Analysis of Femoral Head Replacement
由: Asgari, Seyed Alireza
出版: (2003)

Finite Element Analysis Of Hydraulic Bulging Of Metal Tubes
由: Na'mi, Saleem
出版: (2006)

Application of Finite Difference Method (FDM) and Finite Element Method (FEM) in solving heat problem / Syaza Nurnazihah Jumahat @ Jamak
由: Jumahat @ Jamak, Syaza Nurnazihah
出版: (2023)

Finite element analysis of 3D structure wing box test rig / Hasbolah Mohd Said
由: Mohd Said, Hasbolah
出版: (2010)

Finite element analysis of proximal femur using Charnley Elite type stem / Muhamad Zaidi Salim
由: Salim, Muhamad Zaidi
出版: (2009)

Finite element method (FEM) analysis on coupled process of welding to forming and forming to welding / Dendi Prajadhiana Ishak
由: Ishak, Dendi Prajadhiana
出版: (2021)

Software development: F.E.A.P finite element analysis program / Ahmad Kamal Abdul Aziz
由: Abdul Aziz, Ahmad Kamal
出版: (1992)

Buckling and post-buckling of steel box section using finite element method
由: Isham, Nur Hazwani
出版: (2021)

Determination dynamic characteristic of simple beam using experimental modal analysis and finite element analysis / Mohd Azra'ie Jusop
由: Jusop, Mohd Azra'ie
出版: (2010)

Three dimensional finite element analysis of AL[2]O[3]/ZrO[2] functionally graded material prepared by electrophoretic deposition /
由: Mehrali, Mohammad
出版: (2011)

Finite element analysis of a 20 structural frame of a wing box test stano / Siti Syahioah Moho Rum
由: Moho Rum, Siti Syahioah
出版: (2009)

Finite element analysis of buckling behaviour of profiled steel sheet wall panel with window and door opening / Izrul Fizal Mohd Bakri
由: Mohd Bakri, Izrul Fizal
出版: (2001)

Analysis of extrusion using the finite element method /
由: Wong, Wei-tze
出版: (1978)

Experimental and numerical investigations of the performance of three concentric pipes heat exchanger
由: Saqab, S. Jarallah

Stress analysis of mechanical seal in API 610 pump /
由: Balqis Erizy Zainal
出版: (2021)

Evaluating the non-linear static and dynamic stiffness of rail pad using finite element method / Mohamad Hazman Halim
由: Halim, Mohamad Hazman
出版: (2024)

Fatigue analysis of turret-connection on submerged turret production system used in floating production and storage offloading /
由: Chia, Jyh Woei
出版: (2011)

Diametrical and Axial Indirect Tensile Testing Using H-Ometer on a Weak Rock Model and Its Finite Element Simulation
由: Ahmad, Juraidah
出版: (2001)

The reconciled finite element model of riveted joints structure for crash analysis / Nor Munirah Hassin
由: Hassin, Nor Munirah
出版: (2017)

Nonlinear vibration effects on turbine blades as cantilever beams /
由: Chan, Lee Mun
出版: (1983)

Numerical modelling of surface and sub-surface flows using finite element method /
由: Wong, Wai Sam
出版: (1996)

Optimizing the magnetic core structure of a multi-stack Switched Reluctance (SR) motor using finite-element modeling / Nurul Nadia Zoid
由: Zoid, Nurul Nadia
出版: (2013)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group