Low Frequency Noise Measurements And Analysis Of Capacitive Micro-Accelerometers

Low Frequency Noise Measurements And Analysis Of Capacitive Micro-Accelerometers

Capacitive-sensing micro-accelerometers are being used by the hundreds of millions in the automobile safety systems, health care and consumer electronics products. Their performance is limited by the combined effects of the thermally-dependant electrical and mechanical noise sources. They limit the...

Saved in:

書目詳細資料
主要作者:	Mohd Yasin, Faisal
格式:	Thesis
出版:	2014
主題:	TL500-777 Aeronautics Aeronautical engineering
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Analysis Of The Suspension Beam In Accelerometer For Stiffness Constant And Resonant Frequency By Using Analytical And Numerical Investigation [TL589.2.A3 W872 2007 f rb].
由: Wong, Wai Chi
出版: (2007)

Estimation And Analysis Of Performance, Stability And Control For Unmanned Aerial Vehicle (Uav) Tamingsari Using Semiempirical Method
由: Arshad, Aizam Shahroni Mohd
出版: (2010)

Preliminary Stability Estimation And Analysis Of AEROMECH I UAV Using DATCOM Software
由: Abdullah, Azizul
出版: (2012)

The development of a fixed wing aircraft analysis and design flight dynamic software
由: Ahmad Alaian, Ahmad Eshtiwey
出版: (2016)

Aerodynamic Performance Of USM EFA-1 Remotely Piloted Vehicle [UG1242.D7 Z96 2004 f rb] [Microfiche 7609].
由: Mohd Ali, Zurriati
出版: (2004)

Conceptual Aerodynamic Studies Of A Small Tailless Unmanned Air Vehicle
由: Hashim, Afida
出版: (2014)

Mathematical Model Of Combat Aircraft Sizing & Performance Optimization [TL671.2. P276 2007 f rb].
由: Rajendran, Parvathy
出版: (2007)

An Experimental Study Of Unsteady Vortex / Turbulent Boundary Layer Interactions
由: Haji Serakawi, Abdul Rashid
出版: (2011)

Computation Of 2d Inviscid Compressible Flow Using An Entropy Consistent Euler Flux
由: Roslan, Nur Khairunnisa Hanisah
出版: (2013)

Developing A Methodology In Aviation Risk Management Using Susceptibility And Vulnerability Application For Airline Concerning Air Crisis [TL553.5. N576 2007 f rb].
由: Ng, Ying Chow
出版: (2007)

Flutter Modeling And Simulation Of Wing Section Using Bondgraph Technique [TL574.F6 N841 2005 f rb] [Microfiche 8089].
由: Abdul Razak, Norizham
出版: (2005)

Investigation On The Propulsive Efficiency Of The Small Uav Conceptual Design
由: Yahya, Khairul Ikhsan
出版: (2012)

Nonlinear robust control of functional electrical stimulation system for paraplegia
由: Ahmed, Mohammed
出版: (2019)

The development of reynolds averaged navier stokes solver for a two dimensional compressible flow problem
由: M. Elkamel, Hasan Taher
出版: (2017)

Real-time identification of an unmanned quadcopter flight dynamics using fully tuned radial basis function network
由: Pairan, Mohammad Fahmi
出版: (2018)

Aerodynamic performance evaluation of multi inner blades savonius rotor
由: Al-Ghriybah, Mohanad
出版: (2020)

Prediction of noise radiation on cylinder head
由: Awang, Muhamad Khairudin
出版: (2004)

Low frequency friction induced vibration of automotive disc brake
由: Magaswaran, Kumaresan
出版: (2014)

A study of tyre cavity resonance noise mechanism and countermeasures using vibroacoustic analysis
由: Zamri, Mohamed
出版: (2014)

Skin friction reduction by micro bubbles in pipe flow
由: Erny Afiza, Alias
出版: (2012)

Flight dynamic modelling of a micro quadcopter UAV
由: Ahmad Salar, Anuar
出版: (2019)

The flight trajectory analysis on the existing aircraft
由: M Khalifa, Tarek M.
出版: (2012)

On the development of computer code for aircraft flight dynamics analysis
由: Mohamed Alazomui, Outman
出版: (2014)

Computational fluid dynamics (CFD) analysis for a catalytic converter design
由: Amirnordin, Shahrin Hisham
出版: (2009)

On the development computer, code for determinig the root of equation for transient flight analysis
由: Khaire Elarosi, Muwfik Faidi
出版: (2013)

Preliminary Stability Estimation And Analysis Of Aeromech I Uav Using Datcom Software
由: Abdullah , Azizul
出版: (2012)

The application of combined momentum and blade element theory for aerodynamics performance analysis of rotating blades
由: M Mohammed, Abdelrazzak Gumaa
出版: (2011)

The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software
由: Al Aian, Ahmad Eshtiwey
出版: (2011)

Design and development of an innovative apparatus for producing a spiral catalyst substrate for catalytic converter
由: Hassan, Mohd Fahrul
出版: (2009)

Design a CVT lubricant test device
由: Azlan, Mohd Azwir
出版: (2006)

Designing of public vehicle driver's seat
由: Yahya, Mohd Shahir
出版: (2005)

The effect of vortex trap on helicopter blade lift
由: Yaakub, Mohd Fauzi
出版: (2011)

Lane detection system for autonomous vehicle using image processing techniques
由: Mohd Kiblee, Shahizul Eza
出版: (2005)

Development of a direct fuel injector for a two-stroke gasoline engine
由: Mohd Ali, Mas Fawzi
出版: (2007)

Development of Al-Cu-SiCp metal matrix composite for automotive applications
由: Md Jalil, Mohd Azlis Sani
出版: (2005)

Performance characteristics monitoring of turboprop engine for the development of preliminary requirement of an engine testing facility
由: Mohd Yunos, Siti Nur Mariani
出版: (2011)

Parametric study on the design of baffle for three-dimensional turning diffuser
由: Noh @ Seth, Nur Hazirah
出版: (2016)

A comparative evalaution on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter
由: Jajuli, Fatin Afiqah
出版: (2017)

An intervention for motorcycle helmet usage based on technology acceptance model
由: Rosli, Naida
出版: (2017)

Conceptual design of a small non-rigid airship with particular attention to its static and dynamic stability
由: Hariri, Azian
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group