Volume determination by same camera resolution using close range photogrammetry [CRP] technique / Nor Syamim Abdul Wahab
Nowadays, volume calculations are been used in many engineering studies such as road project, mining project, geological works and also building applications. In volume calculations, classic method calculation are used because of lack of adequate technical knowledge or insufficiency of software a...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2018
|
| 主題: | |
| 在線閱讀: | https://ir.uitm.edu.my/id/eprint/22483/1/TD_NOR%20SYAMIM%20ABDUL%20WAHAB%20AP%20R%2018.5.PDF |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Nowadays, volume calculations are been used in many engineering studies such as
road project, mining project, geological works and also building applications. In
volume calculations, classic method calculation are used because of lack of adequate
technical knowledge or insufficiency of software and hardware to determine the
volume calculations. Generally, volume calculation completed with classic surveying
method sometimes make mistake in calculating (Yanalak 2012). Thus,
photogrammetry by using Close Range Photogrammetry (CRP) technique being use
in determination of volume calculation. This research focused on volume of
excavation profile that using software (Photomodeller Scanner) and hardware (Nikon
camera and Vivo camera) to replace of the classic method. This research aim is to
investigate volume excavation by high camera resolution by using Close Range
Photogrammetry technique. It specifically studies on soil model which is model of
excavation profile. This research is based on data obtained from images captured
using two camera with high resolution. Each of camera were captured the images
from soil model preparation which the actual volume (cut and fill) from the model has
been measure using beaker. The data was processing using Photomodeller Scanner
software to identify volume and also to analyse volume determination quantitatively
from the effect of camera captured. This study's volume calculation for volume
excavation profile using Close Range Photogrammetry technique was able to
determine the volume. This photogrammetric method obtained demonstrate the
effectiveness and capability of low cost system for 3dimensional modelling and
measurement of an objects. |
|---|