Visualization and preservation of cultural heritage using close range photogrammetry at Masjid Sultan Brunei / Wan Nur Farah Edlin Wan Abdul Rahman
To make visualization for image processing of heritage building is the most important since the building is built for the past through years. The conservation of historical building being important parts of cultural heritage since most of the heritage is damaged caused by human factor, natural trage...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2021
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/42259/1/42259.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | To make visualization for image processing of heritage building is the most important since the building is built for the past through years. The conservation of historical building being important parts of cultural heritage since most of the heritage is damaged caused by human factor, natural tragedy, animal and environment itself. The preservation is needed for purposes of identification, protection, interpretation, and historical building for conservation for the next generation. The 3D model method gives a good and photo-realistic appearance to preserve the building. In this study, the technique of Digital Close Range Photogrammetry (DCRP) is used since it currently effective system because it is very easy to use, simple digital image obtained by handheld phone camera, also reduce cost and time effectiveness. The study area was located at Masjid Sultan Brunei, Pasir Mas, Kelantan. This project will view the introduction, methodology, measurement method, 3D modelling, result analysis and conclusion were presented. Besides, the software include in this project are Photomodeler Scanner Software, Sketch-up software, Topcon Tools and AutoCAD. The most useful and important software are Sketch-Up and Photomodeler because by using sketch-up, the 3D model of LOD II can be produce while Photomodeler Scanner was produce 3D model for façade building. The final output is producing a 3D image model and find out the height and length of the building by transferring GPS information. The GPS method was apply is relative static method. |
|---|