Single microstrip patch antenna with aperture coupler fed technique at 2.4 GHz for wireless communication / Ilyano Jusof

This paper presents the basic design of simulation and measurement of the single microstrip patch antenna with aperture coupler fed technique which operates at 2.4 GHz frequency. The microstrip patch antenna with aperture coupler feeding was designed and simulated using Computer Simulation Technolog...

全面介紹

Saved in:
書目詳細資料
主要作者: Jusof, Ilyano
格式: Thesis
語言:English
出版: 2012
主題:
在線閱讀:https://ir.uitm.edu.my/id/eprint/67969/1/67969.pdf
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This paper presents the basic design of simulation and measurement of the single microstrip patch antenna with aperture coupler fed technique which operates at 2.4 GHz frequency. The microstrip patch antenna with aperture coupler feeding was designed and simulated using Computer Simulation Technology (CST) Microwave Environment Studio 2009 and to be used for wireless application. The basic designation is the aperture coupled microstrip antenna couples the patch antenna with microstripline through an aperture. The proposed antenna was fed by aperture coupler fed technique with Defected Ground Structure (DGS) at the middle on the ground plane of the antenna. The performance results of the designed and simulation antenna was analyzed in terms of return loss (SI 1) in dB, VSWR, radiation pattern and gain. The microstrip rectangular patch antenna with aperture coupler fed was fabricated on Fiber Reinforced (FR-4) with dielectric constant and thickness of 5.0 and of 1.6 mm respectively. The proposed antenna was measured in the Microwave Technology Center (MTC) laboratory using Vector Network Analyzer (VNA). The most effective way to increase the return loss is to optimize the patch size, feeder size and slot size. With the suitable chosen combination substrate and perfect match between them, it will give an optimum and the best improvement of the radiation pattern and gain. The simulated and measurement result are presented.