Microstrip dipole array antenna for digital broadcasting application / Adilah Aminudin

This work will describe the design, simulation and fabrication of microstrip dipole array antenna. The microstrip dipole array antenna has been designed and fabricated for digital broadcasting application. Centered at around of 2.6 GHz from the bandwidth of 2.54 GHz to 2.65 GHz, the antenna is desig...

全面介紹

Saved in:
書目詳細資料
主要作者: Aminudin, Adilah
格式: Thesis
語言:English
出版: 2011
主題:
在線閱讀:https://ir.uitm.edu.my/id/eprint/68582/1/68582.pdf
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This work will describe the design, simulation and fabrication of microstrip dipole array antenna. The microstrip dipole array antenna has been designed and fabricated for digital broadcasting application. Centered at around of 2.6 GHz from the bandwidth of 2.54 GHz to 2.65 GHz, the antenna is designed on the FR4 substrate with a permittivity of 5, a thickness of 1.6mm and tangent loss of 0.02. Computer Simulation Technology (CST) Microwave Studio software is used to design and simulate the required response. The fabricated antenna is measured using Vector Network Analyzer (VNA) and Antenna Training Measurement System (ATMS). The results are compared between the simulation and measurement. The results showed that for the dipole array antenna with quarter wavelength matching, the return loss and VSWR obtained are -23.528dB and 1.143 respectively. Meanwhile the measured results for return loss and VSWR are -20.454dB and 1.21 respectively. Meanwhile, microstrip dipole array antenna without quarter wavelength matching the return loss and VSWR obtained are -26.946dB and 1.094 respectively. Meanwhile the measured results for return loss and VSWR are -8.713dB and 2.158 respectively. Thus it can be concluded that, it is important to ensure the matching network used is quarter wavelength in order to obtain a better results between the simulation and measurement.