Optimization and Kinetics of Solid Liquid Extraction of Malaysian Jatropha Curcas Seeds
The Jatropha is a plant which grows in most of tropical and subtropical regions of the world. The oil from the Jatropha seeds can be used as fuel alternative and for making biodiesel. This work aimed to determine the optimum parameters to achieve maximum oil yield in solid liquid extraction of Ja...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English |
| 出版: |
2009
|
| 主题: | |
| 在线阅读: | http://psasir.upm.edu.my/id/eprint/7817/1/abs_---__FK_2009_80.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The Jatropha is a plant which grows in most of tropical and subtropical regions
of the world. The oil from the Jatropha seeds can be used as fuel alternative and
for making biodiesel. This work aimed to determine the optimum parameters to
achieve maximum oil yield in solid liquid extraction of Jatropha seeds under
experimental conditions. The optimum condition was then applied in ultrasound
assisted and microwave pretreatment extraction methods to determine the
amount of yield. The kinetics of the extraction was also studied based on the
assumption of a second order mechanism. The extraction was carried out using
a soxhlet extractor equipped with condenser and hot plate. The effects of five
main factors which are namely type of solvents, temperature, solvent to solid
ratio, reaction time and size of the raw material were investigated experimentally
on the solid liquid extraction of Jatropha seed to optimize the extraction process.
The optimum condition was found at eight hours reaction time, temperature of
around 68°C, coarse particle size (0.5-0.75 mm), solvent to solid ratio of 6:1
(v/w) and using hexane as the solvent. The maximum amount of yield at optimized condition was at 47.3 % by wt. The activation energy was found to be
7145.05 (J/mol) and the highest initial extraction rate was calculated to be and
4.21 (g/L min). The maximum amount of oil extracted by ultrasound assisted
and microwave pretreatment methods were 51.4 and 49.4% respectively. The
oil extracted by conventional, ultrasound assisted and microwave pretreatment
extraction methods contained, respectively, 0.62, 0.67 and 0.63% free fatty acid
and 98.3, 97 and 97.7% triglyceride. |
|---|