Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.

Operasi pemesinan merupakan suatu kaedah umum bagi menghasilkan komponen-komponen mekanikal yang dikeluarkan di segenap pelusuk dunia. Permintaan terhadap perkakas mesin dalam setahun dilaporkan mencecah lebih daripada £10 bilion. The aim of this research is to study the direct effect of tool no...

Saved in:

书目详细资料
主要作者:	Haghighi, Hamidreza Shahabi
格式:	Thesis
语言:	English
出版:	2008
主题:	TJ1-1570 Mechanical engineering and machinery
在线阅读:	http://eprints.usm.my/10369/1/STUDY_ON_THE_EFFECT_OF_TOOL_NOSE_WEAR_ON_SURFACE_ROUGHNESS_AND_DIMENSIONAL_DEVIATION_OF_WORKPIECE_IN_FINISH_TURNING_USING_MACHINE_VISION.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

In Process Roughness Measurement And Tool Nose Radius Wear Assesment In Finish Turning Using Machine Vision
由: Balasundaram, Mohan Kumar
出版: (2017)

Effect Of Tool Geometry And Nose Profile Micro-Deviation On Surface Roughness In Finish Turning
由: Sung , Aun Naa
出版: (2015)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
由: Kiow, Lee Woon
出版: (2017)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
由: Lee, Woon Kiow
出版: (2017)

Study of the effect of tool-workpiece vibration on tool wear and surface roughness /
由: Zhang, Wenbin
出版: (2001)

In-process surface roughness monitoring based on workpiece surface temperature for turning operations
由: Suhail, Adeel H.
出版: (2011)

Machine Vision Application For Automatic Defect Segmentation In Weld Radiographs
由: Soo , Say Leong
出版: (2006)

Application Of Machine Vision On Solder Joint Inspection Using Orthogonal And Oblique Views
由: Ong , Teng Yeow
出版: (2010)

The Influence Of Surface Roughness In Micro Indentation
由: Chuah, Hun Guan
出版: (2013)

An investigation on the effects of AI2 O3 nanolubrication system with surfactant on tool wear and surface roughness in turning process

Experimental investigations of cutting parameters influence on cutting forces, surface roughness and tool life when finish hard turning of Stavax ESR steel
由: Adamu, Gidado Bashir
出版: (2013)

Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner By Mukridz Bin Md Mohtar Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner
由: Mohtar, Mukridz Md
出版: (2012)

A study on tool wear variation in machining process using computer vision method /
由: Alsultan, Osama Ibraheem A.
出版: (2015)

Development Of Position Feedback Sensor Based On Vision Using Neural Network
由: Yunos, Yushazaziah Mohd
出版: (2009)

Design And Verification Of An Oscillating Wear Tester To Stimulate The Piston-Cylinder Tribology In Internal Combustion Engines
由: Al-Tmeemi, Bhaa Alden Hussein Ali
出版: (2011)

Computer vision based tool wear monitoring /
由: Zhu, Mian
出版: (2002)

Optimization of electrical discharge machining process on mild steel workpiece with copper tools /
由: Tamjidy, Mehran
出版: (2012)

The Hp-Adaptive Finite Element Method For Three Dimensional Multiphysics
由: Kamaludin, Siti Sarah
出版: (2014)

Effect of vibrated workpiece in electrical discharge machining (EDM) /
由: Gunawan Setia Prihandana
出版: (2006)

Study On The Development Of Ceramic Cutting Tool (zta I Zta-mgo) And Its Machining Performance In Slot Milling
由: Hassan, Mohd Nor Hakim
出版: (2010)

Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation
由: Abd Aziz, Syazxerlin
出版: (2018)

Neural networks prediction of cutting tool wear during turning operations /
由: Mahardika, Muslim
出版: (2005)

Optimization of cutting parameters for surface roughness in CNC turning machining with aluminum alloy 6061 material
由: Ali Abdullah, Mohammed Ahmed

A study of the effects of machining parameters on the surface roughness in the turning process / Nor Akram Abdullah
由: Abdullah, Nor Akram
出版: (2010)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Karh Heng, Leong
出版: (2017)

Low Dimensional Carbon Based Materials For Low Pressure Measurement Application
由: Haniff, Muhammad Aniq Shazni Mohammad
出版: (2015)

Low Dimensional Carbon Based Materials For Low Pressure Measurement Application
由: Haniff, Muhammad Aniq Shazni Mohammad
出版: (2015)

Quantitative Modelling Of Oee Use With Spreadsheet For Machine Capacity Planning
由: Ong, Yung Chieh
出版: (2014)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Leong, Karh Heng
出版: (2017)

A study of the relationship between three dimensional topography of flank wear surface and cutting forces during turning operation :
由: Sumit Kanti Sikdar
出版: (2000)

Integration Of Overall Equipment Effectiveness (Oee) And Reliability For Measuring Machine Effectiveness
由: Samat, Hasnida Ab
出版: (2010)

Model Development Of Single Unit Machine Capacity Measure For Production Planning And Control
由: Ong , Yung Chieh
出版: (2009)

Development Of Output-Based Decision Support Maintenance Model (OBDSMM) For Production Machines
由: Ahmad, Rosmaini
出版: (2012)

Effect of finishing procedures on surface roughness of selected tooth coloured restorative materials /
由: Wan Mazidah Wan Abd. Rahman
出版: (2008)

Surface roughness study on aluminium in high speed turning process
由: Dahlan, Mohd Shazwan
出版: (2019)

Analyzing the effect of parameter setting on surface roughness of turning process
由: Alias, Mohd Fairuz
出版: (2022)

Machinability assessment and enhancement of aerospace alloys through workpiece preheating in end milling /
由: Hossain, Mohammad Istiyaq
出版: (2008)

Effect of Wire Electrical Discharge Machining (WEDM) parameters and additive treatment on surface roughness and dimensional stability of tool steel
由: Chew, Seow Lee
出版: (2013)

Prediction of tool wear and surface roughness of waspaloy by using Artificial Neural Network (ANN)
由: Gan, Chin Ket
出版: (2021)

Micro-finishing of EDM machined dies by abrasive jet machining /
由: Venkataraman Narayanan
出版: (1987)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group

Cannot write session to /tmp/vufind_sessions/sess_s35uu6nt2dfidj527i93lupl18