Modeling of reactively sputtered TiAIN coating on tungsten carbide insert tool its properties and cutting performance in dry turning of AISI D2 steel

Modeling of reactively sputtered TiAIN coating on tungsten carbide insert tool its properties and cutting performance in dry turning of AISI D2 steel

An extended theoretical model of reactive sputtering of TiAIN coating has been developed to study the effect of substrate bias (Vb) and nitrogen (N2) flow rate on the coating composition and deposition rate. The model simulation results showed that the critical N2 flow rate (fn2) to achieve a stoich...

Saved in:

书目详细资料
主要作者:	Budi, Esmar
格式:	Thesis
语言:	English English
出版:	2010
主题:	T Technology (General)
在线阅读:	http://eprints.utem.edu.my/id/eprint/15716/1/Modeling%20Of%20Reactively%20Sputtered%20TiAIN%20Coating%20On%20Tungsten%20Carbide%20Insert%20Tool%20Its%20Properties%20And%20Cutting%20Performance%20In%20Dry%20Turning%20Of%20AISI%20D2%20Steel.pdf http://eprints.utem.edu.my/id/eprint/15716/2/Modeling%20of%20reactively%20sputtered%20TiAIN%20coating%20on%20tungsten%20carbide%20insert%20tool%20its%20properties%20and%20cutting%20performance%20in%20dry%20turning%20of%20AISI%20D2%20steel.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Study of optimal machining parameters when machining AISI 304 stainless steel with carbide-pvd coated (TiAIN) cutting tool
由: Mohd Rahim, Mohd Yusri
出版: (2013)

Drilling of stainless steel AISI 630 H1075 using different type of TiAIN carbide drill
由: Ahmad Alwi, Ahmad Afzan
出版: (2008)

Ductile mode cutting of tungsten carbide /
由: Liu, Kui
出版: (2002)

Performance of carbide insert in turning of titanium alloy under carbon dioxide cryogenic cooling
由: Mat, Siti Asiyah
出版: (2021)

Machinability assessment when turning AISI 316L austenitic stainless steel using uncoated and coated carbide inserts
由: Nur, Rusdi
出版: (2016)

Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools /
由: Lawal, Sunday Albert
出版: (2013)

Optimization of cutting parameters to reduce cutting tool temperature in a dry turning process using genetic algorithm
由: Muhammad Waseem
出版: (2014)

Glass cutting in LCD manufacturing by using tungsten carbide wheel /
由: Chong, Hon Hiong
出版: (2005)

Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert
由: Mastuki, Ammar Aizat
出版: (2019)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
由: Lee, Woon Kiow
出版: (2017)

The feasibility of quarry dust powder suspension for surface modification of tungsten carbide cobalt
由: Yap, Ching Yee
出版: (2021)

The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process
由: Juwara, Luqman Nul Hakim
出版: (2016)

The Effect Of Synthetic Soluble Cutting Fluid Pressure Towards Machinability Using Stainless Steel 304 With Coated Cemented Carbide Insert
由: Zainal Ariffin, Selamat
出版: (2009)

Performance of whisker reinforced ceramic insert during hard turning
由: Balakrishnan, Santhirakumar
出版: (2003)

Surfaces (Technology) Surface preparation Coating processes Tungsten carbide-cobalt alloys
由: Wong, Kah Yan
出版: (2021)

Synthesis of tungsten carbide from waste date palm tree carbon by mechanical alloying
由: Mohd. Mustapha, Norasyikin
出版: (2013)

Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating
由: Abdullah, Arman Shah
出版: (2010)

Optimization of tool geometry design for free cutting steel (AISI 12L14) in turning operation
由: Mohammad, Rosdi
出版: (2017)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
由: Tang, Yu Cai
出版: (2006)

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
由: K. Seveen, K. Muniswaran
出版: (2007)

Evaluation On Machining Performance Of AISI 1045 Steel Under Dry Condition
由: Ab Ghani, Mohd Khairul Nizam
出版: (2017)

Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
由: Mazda, Nur Syahirah
出版: (2018)

Machining wear of cemented carbide insert /
由: Tao, Yuping
出版: (1999)

Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition
由: Norfauzi, Tamin
出版: (2017)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
由: Kiow, Lee Woon
出版: (2017)

Dry Sliding Wear And Friction Behavior Of Silicon Carbide And Multi Wall Carbon Nanotubes Reinforced Magnesium Matrix Hybrid Composites
由: Tee, Zhen Wei
出版: (2016)

Surface Roughness Study On Mild Steel In Conventional Turning Process Under Three Condition Cutting Fluids
由: Abdullah, Abd Halimnizam
出版: (2019)

The Effect of tempering temperatures on a fatigue of AISI 4130
由: Norakmar, Jamal
出版: (2013)

Development of ceramic cutting insert of aluminium oxide (Al2O3) and titanium carbide (TiC) for machining steel
由: Isa, Mohd. Akmal
出版: (2007)

The Wear Pattern of Router Cutter Material Between High Speed Steel and Solid Tungsten Carbide in Cutting Rubberwood Medium Density Fiberboard
由: Bakeri, Ahmad Bahtiar
出版: (2002)

Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool
由: Khuzaimi, Mohd Aris
出版: (2014)

3D modeling of orthogonal cutting on AISI 1045
由: Arbabzadeh, Iman
出版: (2012)

Viability of microwave hybrid sintering process for tungsten carbide cermets
由: Hammad Thauri, Shahdura
出版: (2016)

Performance evaluation of wire electro-discharge machining on tungsten carbide
由: Hassan, Mas Ayu
出版: (2006)

Optimisation of electrical discharge machining of tungsten carbide for rapid prototyping /
由: Lee, Soo Hiong
出版: (2001)

Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel
由: Shamsudin, Zuraidy
出版: (2007)

Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI
由: Adam, Muhamad Alif
出版: (2023)

Preparation and characteriztion of tungsten carbide from carbon of palm kernel shells
由: Dasril, Ratna Sari Dewi
出版: (2007)

A study of the optimum parameters in EDM machining of tungsten carbide material /
由: Khin, Moe Aye
出版: (1998)

Preparation and characterization of reactive RF sputtered nitride thin films /
由: Chen, Geok Loo
出版: (1999)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group