Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide

Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide

Recent development in metal stamping introduced a new die namely hardened High Thermal Conductivity Steel-150 (HTC-150). Understanding the cutting parameters, surface characteristics and cutting tool wear during machining this new die would lead to efficiency in machining operation. This research co...

Saved in:

書目詳細資料
主要作者:	Azhar, Anis Afuza
格式:	Thesis
語言:	English English
出版:	2019
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://eprints.utem.edu.my/id/eprint/24671/1/Surface%20Integrity%20And%20Tool%20Wear%20Of%20Hardened%20HTCS-150%20Steel%20%2852%20HRC%29%20In%20Milling%20With%20Tia1n%20Coated%20Carbide.pdf http://eprints.utem.edu.my/id/eprint/24671/2/Surface%20Integrity%20And%20Tool%20Wear%20Of%20Hardened%20HTCS-150%20Steel%20%2852%20HRC%29%20In%20Milling%20With%20Tia1n%20Coated%20Carbide.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Analysis of surface intergrity and tool wear during machining high thermal conductivity steel 150 (HTCS- 150)
由: Wan Mohd Yusoff, Wan Mohd Azahar
出版: (2018)

Tool wear and tool life performance of TiA1N coated carbide cutting tools when turning XW 42 hardened tool steel
由: Effendy, Effendy
出版: (2007)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2003)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2004)

Investigation into minimal cutting fluid application in high speed milling of hardened steel using carbide mills /
由: Thanongsak Thepsonthi
出版: (2005)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
由: Tang, Yu Cai
出版: (2006)

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
由: K. Seveen, K. Muniswaran
出版: (2007)

Wear Performance Of Concrete Mixture Paddles With Hardened Surfaces.
由: Chiong, Kung Kwong
出版: (2003)

Performance of coolant strategies when turning hardened martensitic stainless steel using tialn coated carbide tool
由: Mohamed Elshwaini, Amad Elddein Issa
出版: (2017)

Hyperbaric Recompression Chamber (HRC) monitoring application system development
由: Abu Bakar, Fitra Darina
出版: (2006)

Wear mechanism and surface integrity studies when turning hardened tool steel using wiper coated ceramic tool
由: Umar, Alkali Adam
出版: (2011)

Face milling of titanium alloys using coated and uncoated carbide tools /
由: Safian Sharif
出版: (1999)

Machining wear of cemented carbide insert /
由: Tao, Yuping
出版: (1999)

Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel
由: Jasni, Nur Akmal Hakim
出版: (2013)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
由: Mohd Hafizu, Zakaria
出版: (2019)

Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering
由: Sabar, Mustafa Muneim
出版: (2013)

The perceptions of professionals on the traffic impact assessment (TIA) report
由: Chuah, Seong Jin
出版: (2010)

High speed end milling of soda lime glass using coated carbide tools with compresses air application /
由: Mahmud, Md. Asif
出版: (2013)

Effect Of Coating Thickness On The Microstructure, Mechanical And Wear Properties Of A1TiN Coatings Deposited Using Arc Ion Plating Technique
由: Kadhim, Kamil Jawad
出版: (2016)

Effect of cutting parameters on surface integrity in groove milling of Hastelloy-C276 using coated carbide end mills under dry and wet conditions
由: Abdulradha Al-Falahi, Muath Dheaa
出版: (2015)

Performance evaluation of uncoated and coated carbide tools when end milling of titanium alloy using response surface methodology
由: Mohruni, Amrifan Saladin
出版: (2008)

The effect of milling time on aluminum-silicon carbide composite
由: Ibrahim, Mustafa Khaleel
出版: (2014)

Performance evaluation of wiper and conventional coated ceramic inserts when turning hardened tool steel
由: Affandi Mohd. Zainal, Affandi
出版: (2006)

Flutter Analysis Of A Scaled Model Of An Eagle 150b/Ac Wing
由: Mohd. Rafie, Azmin Shakrine
出版: (2007)

Monitoring of tool wear in milling using cutting force sensing /
由: Ning, Ting
出版: (1997)

Multi Objective Performance Optimization Of Hybrid Rotary Ultrasonic Assisted End Milling For Machining Hardened Steel Material
由: Ramli, Azlan
出版: (2020)

Storage hardening of natural rubber /
由: Eng, Aik Hwee
出版: (1989)

Development of traffic impact assessment (TIA) criteria in Malaysia : Johor State as the basic model
由: Wee, Ka Siong
出版: (2001)

Performance evaluation of coated ceramic cutting tools with T-land edge preparation when turning hardened tool steel
由: Wan Abdul Rahaman, Wan Emri
出版: (2006)

Wear Behaviour of Filtered-Arc Deposited Titanium Nitride Coatings
由: Amir, Norlaili
出版: (2006)

Performance evaluation of carbide tool in end milling of medium density fiberboard
由: Yusoff, Salahuddin
出版: (2010)

Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions
由: Syeda Najiha, Masood
出版: (2015)

Development of an automated smart room controller using ATMEL AT89S52
由: Emi Izhanizam, Azmi

Wrinkling prediction in deep drawing metal forming : kinematic hardening model versus mixed hardening model
由: Wan Iryana, Wan Md Nor
出版: (2017)

Machinability study of coated and uncoated carbide tools in drilling inconel 718
由: Rival, Rival
出版: (2014)

Electroless Copper Composite Coatings Reinforced With Silicon Carbide And Graphite Particles
由: Faraji, Soheila
出版: (2011)

Structural and optical properties of nanocrystalline silicon thin films grown by 150MHz VHF-PECVD
由: Tarjudin, Nurul Aini
出版: (2012)

Women entrepreneurs’ intentions and challenges: a case of Bidayuh entrepreneurs in Kuching / Valeni Tia Basil
由: Basil, Valeni Tia
出版: (2014)

Experimental Investigation On The Influence Of DLC Coating On The Wear Behaviour Of Helical Gear
由: Abdul Hamid, Abdul Hakim
出版: (2019)

Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling
由: Nur Shafiza Afzan, Sharif
出版: (2015)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group