Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI

Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI

The purpose of this research was to look into the tool life performance of uncoated carbide under dry settings, to find the best parameters for carbide tool performance under dry conditions, and to investigate the tool wear behavior under dry conditions. The notion of tool life is regarded to be the...

Saved in:

书目详细资料
主要作者:	Adam, Muhamad Alif
格式:	Thesis
语言:	English English
出版:	2023
在线阅读:	http://eprints.utem.edu.my/id/eprint/27152/1/Optimization%20of%20carbide%20tool%20performance%20under%20dry%20conditions%20in%20turning%20titanium%20alloy%20Ti-6A-4V%20ELI.pdf http://eprints.utem.edu.my/id/eprint/27152/2/Optimization%20of%20carbide%20tool%20performance%20under%20dry%20conditions%20in%20turning%20titanium%20alloy%20Ti-6A-4V%20ELI.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert
由: Mastuki, Ammar Aizat
出版: (2019)

Pelarikan aloi titanium Ti-6Ai-4V ELI menggunakan perkakas karbida dalam keadaan kering /
由: Ibrahim, Gusri Akhyar
出版: (2010)

Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V
由: Rashiddy Wong, Freddawati
出版: (2008)

Improved machinability of titanium alloy TI-6AL-4V through workpiece preheating /
由: Ginta, Turnad Lenggo
出版: (2010)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
由: Kamdani, Kamaruddin
出版: (2005)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
由: Kamdani, Kamaruddin
出版: (2005)

Influence of preheating on chatter and machinability of titanium Alloy-Ti6A14V /
由: Kamaruddin Kamdani
出版: (2005)

Chatter & machinability aspects in end milling of metal matrix composite (MMC) and titanium alloys -Ti-6A1-4V using carbide & pcd inserts /
由: Nor Khairusshima binti Muhamad Khairussaleh
出版: (2007)

Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes
由: Jonid, Izyan Dayana
出版: (2019)

Performance of carbide insert in turning of titanium alloy under carbon dioxide cryogenic cooling
由: Mat, Siti Asiyah
出版: (2021)

Embedment of HA/Ti composite powder on superplastic titanium alloy (Ti-6A1-4V) for medical implant applications /
由: Adibah Haneem Mohamad Dom
出版: (2010)

Evaluation of end milling titanium alloy Ti-6A1-4V using finite element method
由: Ahmadianchashmi, Rouzbeh
出版: (2012)

The effect of substrate temperature of titanium aluminium nitride coating on titanium alloy (TI-6AL-4V) substrate using PVD method
由: Bahador, Hamid
出版: (2013)

Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method
由: Jaafar, Noor Azam
出版: (2013)

Embedment of hydroxyapatite (HA) on titanium alloy (Ti6AI4V) via superplastic deformation method for medical application /
由: Hidayah Mohd Khalid
出版: (2011)

Effect of electrode cooling on the performance of electrical discharge machining (EDM) of titanium alloy Ti-6A1-4V /
由: Abdulkareem, Suleiman
出版: (2009)

Powder metallurgy compacted electrodes of electrical discharge machining for surface modification of titanium alloy (Ti-6AI-4V) /
由: Ndaliman, Mohammed Baba
出版: (2013)

Face milling of titanium alloys using coated and uncoated carbide tools /
由: Safian Sharif
出版: (1999)

Tribological Behaviour Of TI-5AI-4V-0.6Mo-0.4Fe And TI-6AI-4V Alloys In Cryogenic Environment
由: Yap, Tze Chuen
出版: (2011)

Biotribocorrosion performance of titanium alloy Ti-6AI-4V and stainless steel 316l under simulated body environment
由: Alias, Juliawati
出版: (2008)

Wire electro-discharge machining of titanium alloy (TI6AL4V) using brass and zinc coated brass wires
由: Jamal, Siti Khalijah
出版: (2009)

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
由: Mohd Harun, Dalila
出版: (2020)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
由: Abd. Rahim, Erween
出版: (2005)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
由: Abd. Rahim, Erween
出版: (2005)

Performance evaluation of ultrasonic assisted wire electrical discharge turning for TI-6AL-4V material
由: Mohd Zakaria, Muhammad Akmal
出版: (2023)

Modelling of stagnant zone formation on diamond cutting tool when turning titanium alloy
由: Thet, Thet Mon
出版: (2007)

Performance evaluation of different types of graphite electrodes on titanium (Ti-6AI-4V)
由: Abdul Haq, Reazul Haq
出版: (2009)

Modeling of reactively sputtered TiAIN coating on tungsten carbide insert tool its properties and cutting performance in dry turning of AISI D2 steel
由: Budi, Esmar
出版: (2010)

Performance evaluation of different types of graphite electrodes on titanium (Ti - 6A1 - 4V)
由: Abdul Haq, Reazul Haq
出版: (2009)

Influence of magnetic field from permanent magnets on chatter suppression in end milling of titanium alloy (Ti6A14V) /
由: Syidatul Akma binti Sulaiman
出版: (2013)

Optimization of surface roughness using response surface methodology and genetic algorithm in high speed and milling of titanium alloy : Ti-6A1-4V /
由: Md. Shah Alam
出版: (2009)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
由: Mohd Hafizu, Zakaria
出版: (2019)

Tool wear and tool life performance of TiA1N coated carbide cutting tools when turning XW 42 hardened tool steel
由: Effendy, Effendy
出版: (2007)

Development Of Fuzzy Logic Model For Turning Process Of Steel Alloy And Titanium Alloys
由: Tan, Jit Yean
出版: (2004)

Kebolehmesinan aloi titanium ti-6al-4v dalam keadaan pelincir berkualiti minima (MQL) /
由: Ahmad Yasir Md Said
出版: (2011)

Experimental study on the aluminum alloy 7075 during turning under dry and minimal quantity lubrication conditions /
由: Abdul Rahman Abdul Ghani
出版: (2021)

Ti-6a1-4V Alloy Coated With Bioceramics By Using Radiofrequency Plasma Sputtering Technique
由: Ali, Raheem Lafta
出版: (2016)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
由: Tang, Yu Cai
出版: (2006)

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
由: K. Seveen, K. Muniswaran
出版: (2007)

Properties of titanium carbide reinforced aluminium silicon alloy matrix
由: M. Sayuti,
出版: (2012)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group

Cannot write session to /tmp/vufind_sessions/sess_46i8knpufb2a4sv5kh0dfbk9s3