A new structure of 12Slot-10Pole field-excitation flux switching synchronous machine for hybrid electric vehicles
The new structure 12Slot-10Pole-field excitation flux switching synchronous machine (FEFSSM) with all active parts of the field excitation coil (FEC) and the armature coil is located in the stator, used for hybrid electric vehicles (HEVs). Design of the new structure different from the previous...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English English |
| 出版: |
2014
|
| 主题: | |
| 在线阅读: | http://eprints.uthm.edu.my/1478/1/24p%20INTAN%20FAZLINA%20YAHAYA.pdf http://eprints.uthm.edu.my/1478/2/INTAN%20FAZLINA%20YAHAYA%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1478/3/INTAN%20FAZLINA%20YAHAYA%20WATERMARK.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The new structure 12Slot-10Pole-field excitation flux switching synchronous machine
(FEFSSM) with all active parts of the field excitation coil (FEC) and the armature coil is
located in the stator, used for hybrid electric vehicles (HEVs). Design of the new
structure different from the previous design which no permanent magnets. For a high-speed motor applications together with the system coupled with reduction gear, designed
the rotor consists of a single piece of iron make it even stronger. The target of the same
design specification motor in IPMSM used for LEXUS RX400h with a maximum torque
of 210Nm with a 4:1 gear reduction ratio, 123kW maximum power, maximum power
density of more than 3.5kW/kg, and a maximum speed of 20,000 r / min. To optimize
the design, the design parameters of the rotor, the armature and the FEC changed
repeatedly until the target is achieved with a maximum density 30A/mm2 for both the
armature and the FEC. The end result after optimizing the design allows the latest
designs with the same power density in the IPMSM can be used in commercial SUV�HEV. |
|---|