Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation
Minimum quantity lubrication (MQL) machining is one of the promising solutions to the requirement for reducing cutting fluid consumption. The work here describes MQL machining in a range of lubricant consumption of 2.0-2.355ml/s, which is between 10– 100 times lesser than the consumption usually...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | أطروحة |
| اللغة: | English English English |
| منشور في: |
2012
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://eprints.uthm.edu.my/2000/1/24p%20NIK%20FAZLI%20SAPIAN.pdf http://eprints.uthm.edu.my/2000/2/NIK%20FAZLI%20SAPIAN%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/2000/3/NIK%20FAZLI%20SAPIAN%20WATERMARK.pdf |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | Minimum quantity lubrication (MQL) machining is one of the promising solutions to
the requirement for reducing cutting fluid consumption. The work here describes MQL
machining in a range of lubricant consumption of 2.0-2.355ml/s, which is between 10–
100 times lesser than the consumption usually adopted in industries. MQL machining in
this range is called pulse jet coolant delivery system. A specially designed system, the
IP MQL, was used for concentrating small amounts of lubricant onto the cutting
interface. The performance of concentrated spraying of lubricant in pulse jet coolant
delivery system design was simulated and compared with that of current ‘Pulse Jet
MQL’ systems. The concentrated spraying of lubricant with a specially designed system
was found to be effective in increasing tool life in the pulse jet coolant delivery system
range. |
|---|