Development of three-dimensional (3D) grayscale Photolithography process for microfluidic curvature Structures

Development of three-dimensional (3D) grayscale Photolithography process for microfluidic curvature Structures

Three-dimensional (3D) microstructures can enhance the optical, electrical and mechanical properties of the microfluidic system. However, the 3D microfabrication is challenging when simultaneous control over fabrication of lateral and vertical dimensions is required. To achieve such control, g...

Saved in:

書目詳細資料
主要作者:	Abdul Hamid, Intan Sue Liana
格式:	Thesis
語言:	English
出版:	2018
主題:	TJ1125-1345 Machine shops and machine shop practice
在線閱讀:	http://eprints.uthm.edu.my/695/1/24p%20INTAN%20SUE%20LIANA%20ABDUL%20HAMID.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels
由: Idris, Muhammad Ridzuan
出版: (2015)

Influence of agglomeration phenomenon in machining of AISI D2 hardened steel using nano chromium powder mixed-EDM
由: Abbas, Mohammed Abdulridha
出版: (2020)

Experimental study of biomedical stainless steel 316l vibration assisted milling using retrofittable 1D UVAM worktable
由: Abdul Latif, Abdul Afiff Fiqhry
出版: (2017)

Effect of chromium (cr) particle size and span-20 surfactant on Aisi d2 hardened steel using electrical discharge machining
由: Jamil Hosni, Nor Ain
出版: (2020)

Kajian persepsi pelajar terhadap amalan keselamatan bengkel kejuruteraan awam (perkayuan)
由: Mior Ismail, Mior Mohd. Suhairin
出版: (2003)

Kajian persepsi pelajar terhadap amalan keselamatan bengkel kejuruteraan awam (perkayuan)
由: Mior Ismail, Mior Mohd. Suhairin
出版: (2003)

A Study On Ultra Fine Grinding Of Silica And Talc In Opposed Fluidized Bed Jet Mill [TJ1345. S187 2008 f rb].
由: Thilagan Palaniandy, Samayamutthirian
出版: (2008)

Practical Development Of An Open Architecture Personal Computer-Based Numerical Control (Oapc-Nc) System [TJ1189. P535 2005 f rb].
由: Pang, Tze Hong
出版: (2005)

Performance of laser assisted micro-milling (laμmill) of titanium alloy using micro ball end mill
由: Mohid, Zazuli
出版: (2018)

Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket
由: Abdullah, Haslina
出版: (2017)

New technique for the development of open CNC cell controller based on ISO 14649 and ISO 6983
由: Latif, Kamran
出版: (2015)

Amalan pengurusan keselamatan bengkel kemahiran hidup (KHB) Sekolah Menengah Harian Daerah Batu Pahat
由: Saher, Mohd Najib
出版: (2015)

Improvement of machinability and surface integrity during electro discharge machining of inconel 718 using nano powder suspension dielectric
由: Ahmad, Said
出版: (2016)

Pembangunan dan keberkesanan modul perancahan berstruktur dalam pembelajaran berasaskan projek terhadap pengetahuan dan kemahiran bagi projek mesin larik pelajar Politeknik
由: Rubani, Siti Nur Kamariah
出版: (2016)

Design and development of an automated metered dose inhaler (MDI) for asthmatic patient
由: Tsen, Vui Hin
出版: (2018)

Study of using three dimensional printer for EDM electrode fabrication
由: Hassan, Noor Haslyena
出版: (2011)

Study on cutting operation in turning process by 3D Simulation using deform 3D
由: Mohd Zukeri, Mohd Zaim
出版: (2010)

Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance edm (HPEDM) on AISI D2 hardened steel
由: Abdul Hamid, Faizul Ezmat
出版: (2013)

Development of open platform controller for step-NC compliant CNC system
由: Chi Adam, Mohd Khairil Anbia
出版: (2020)

Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel
由: Jasni, Nur Akmal Hakim
出版: (2013)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
由: Abd. Rahim, Erween
出版: (2005)

Pembentukan dan penilaian indikator bengkel elektrik cemerlang: satu kajian di Sekolah Menengah Teknik Johor Bahru
由: Mohamed Yunus, Ahmad Syukri
出版: (2003)

Persepsi pelajar terhadap panduan keselamatan makmal kejuruteraan awam KUiTTHO
由: Jusoh, Ahmad Yusni
出版: (2002)

Kajian terhadap amalan keselamatan dan kesihatan di Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat
由: Po'a, Ayu Wirdawati
出版: (2002)

Persepsi Pelajar Diploma Kejuruteraan Awam, KUiTTHO terhadap manual pengendalian dan penyelenggaraan mesin pengetaman kayu
由: Yusoff, Mohd Faizal
出版: (2003)

Kajian terhadap keperluan garis panduan pengendalian makmal automasi : pneumatik,bagi pelajar sarjana muda teknologi kejuruteraan mekanikal, Fakulti Teknologi Kejuruteraan, KUiTTHO
由: Kosnan, Noor Mayafaraniza
出版: (2003)

Pembentukan dan penilaian indikator bengkel kayu kejuruteraan awam cemerlang: satu kajian di Politeknik Sultan Salahuddin Abdul Aziz Shah
由: Mohd Yazit, Tengku Nursyarah Bariah
出版: (2003)

Development of the process planning for machining prismatic parts
由: Shamsudin, Shazarel
出版: (2005)

Optimization of parameters of laser non-linear inclined cutting on stainless steel metal
由: Abbas, Abbas Allawi
出版: (2014)

Prediction of punching life span for phosphor bronze stamping operation
由: Hashim, Mohd Fadzil Muin
出版: (2007)

Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method
由: Md Zain, Mohd Zahiruddin
出版: (2005)

Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd.
由: Haris, Nur Ismalina
出版: (2013)

Design and development of an automated metered dose inhaler (MDI) for asthmatic patient
由: Tsen, Vui Hin
出版: (2018)

Development of step-compliant system for turn-mill operations
由: Mohd Nor, Mohd Fahrurazi
出版: (2012)

Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network
由: Mohammed Saif, Yazid Abdulsameea
出版: (2014)

Olahan air sisa pusat penyembelihan ayam menggunakan elektrod keluli tahan karat dan aluminum melalui proses gabungan elektro-penggumpalan dan pengelompokan dan penggumpalan dengan menggunakan aluminum sulfat dan poli-aluminum klorida
由: Sakury, Khairudin
出版: (2017)

Performance evaluation of different types of graphite electrodes on titanium (Ti - 6A1 - 4V)
由: Abdul Haq, Reazul Haq
出版: (2009)

Motorcyclist muscle fatigue decision support tools in prolonged motorcycle riding / Helmi Rashid
由: Rashid, Helmi
出版: (2019)

Comparison between the estimated and actual productivity for the fabrication of a steel framework / Mohd Zukarnan Mat Deraseh
由: Mat Deraseh, Mohd Zukarnan
出版: (2010)

Study on surface integrity of tungsten carbide macidned by die-sinking EDM using Taguchi method / Amizan Amran
由: Amran, Amizan
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group