Implementation of Takagi Sugeno method as fuzzy logic control with multiple sensors on fire fighter robot prototype navigation
Autonomous mobile robot will become an interest by many researchers. Due to needs of an effective navigational system for the robot, many approach was purposed to control the reliability of the system in order to achieve an optimum control system respond. Nowadays, AI was used as one of the ap...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English English |
| 出版: |
2022
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/6973/1/24p%20ALIF%20AIMAN%20MOHAMAD%20PAUZI.pdf http://eprints.uthm.edu.my/6973/2/ALIF%20AIMAN%20MOHAMAD%20PAUZI%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/6973/3/ALIF%20AIMAN%20MOHAMAD%20PAUZI%20WATERMARK.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Autonomous mobile robot will become an interest by many researchers. Due to needs
of an effective navigational system for the robot, many approach was purposed to
control the reliability of the system in order to achieve an optimum control system
respond. Nowadays, AI was used as one of the approached to enhance the decision
making by the robot itself without depending on the user. In this development, multiple
sensors were implemented to increase the detection accuracy of the prototype during
navigate on constantly changing environment. By using multiple sensors (ultrasonic
sensor) it means that, it will have more input information so, in order to manage all of
this data information, intelligent control strategy was required to achieve an optimum
output in term of efficiency and accuracy. On this development, previous prototype
was upgraded into more intelligent system. Fuzzy Logic was introduced to this
development by using a Takagi Sugeno inference method. In this project Fuzzy control
was designed with aid of computing software (MATLAB) and by using a Arduino
MEGA controller Fuzzy logic control was apply to realize the real-time simulation for
the robot navigation. The fire detection unit by using IR sensor module was purposed
to make sure it can scan the IR wave generated by the flame. Differential steering
method was selected for semi-autonomous robot driving system and it was powered
by 2 DC motor for the robot navigation. All the function of the robot is tested in order
to evaluate the capability of the system on the robot by referred to the project scope.
On this development, the effectiveness of the system was vary with the number of
Fuzzy Rule. The effectiveness of the Fuzzy control was observed by the time taken for
the prototype completed the route and the time respond for the prototype to avoid
obstacle during the navigation inside the test rig. |
|---|