Metal filling characteristics of aluminium lost foam casting

Metal filling characteristics of aluminium lost foam casting

In the present research, experimental investigation of flow pattern of lost foam casting has been conducted. For this project, the investigation has main objectives to investigate the effect of sprue position, pouring temperature and different pouring condition on flow pattern of aluminium lost foam...

Saved in:

書目詳細資料
主要作者:	Wong, Yun Hong
格式:	Thesis
語言:	English
出版:	2009
主題:	TJ Mechanical engineering and machinery TS Manufactures
在線閱讀:	http://eprints.utm.my/id/eprint/12224/6/WongYunHongMFKM2009.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Lost foam casting of LM6-Al-Si cast alloy
由: A. Asmael, Mohammed Bsher
出版: (2009)

Lost foam casting of LM6-A1-Si cast alloy under pressure
由: Niakan , Ali Asghar
出版: (2010)

Evaluation of significant factors in aluminum lost foam casting using doe approach
由: Shayganpour, Amirreza
出版: (2010)

Effects of process parameters on lost foam casting of Al-Si (LM6) alloy
由: Karimian, Majid
出版: (2011)

Investigation on quality of hydroxyapatite adhesion on investment casting mould
由: Lotfabadi, Amir Fereidouni
出版: (2008)

Parametric Study for Runner Modification of Die Casted Part with Venting Systems
由: JASMINE ANAK, JENDIA
出版: (2023)

Effect of oil palm fibre addition on the mechanical properties of shell mould investment casting
由: Soh, Wen Hann
出版: (2009)

Optimization of lubrication techniques on machining performance of aluminium alloy 319
由: Zainal Ariffin, Selamat
出版: (2018)

Impact characteristic and energy absorption of auxetic foam-filled square tubes
由: Mohsenizadeh, Saeid
出版: (2015)

Crash performance of polyurethane foam-filled aluminium column
由: Nurul Izzah, Ab Rahim
出版: (2020)

Lost foam casting of aluminium - silicon (LM6) cast alloy
由: G. Khalifa, Alsalihin
出版: (2009)

Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel
由: Farhana, Yasmin
出版: (2021)

Characteristics of motion errors of 3–Axis CNC vertical milling machines
由: Ahmad Bakir, Azman
出版: (2010)

Study on the mechanical and wear properties of Mg/SiC/Gr hybrid metal matrix composite
由: Abdulqader Al-Maamari, Azzat Esam
出版: (2020)

Simulation of metal stamping for panel front door inner part for new automotive model development
由: Mesuan, Mohd. Ariffin
出版: (2010)

Investigation of Finite Element Model of Futsal Ball and Simulation of its Impact Characteristics.
由: Fabian Halley Pata, Alban Dattu
出版: (2019)

Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V
由: Rashiddy Wong, Freddawati
出版: (2008)

Investigation of nickel aluminium bronze (nab) metals cast and its properties
由: Mohd Nasuha, Ab Halim
出版: (2023)

Equipment and process performance improvement using automated monitoring system
由: Poobalan, Prakash
出版: (2009)

Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment
由: Ramanathan, Geeva Raj
出版: (2009)

Performance and evaluation of graphite when machining hardened steel ASSAB 718
由: Saeed Ahmed, Radwan Ahmed
出版: (2009)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
由: Lim, Syh Kai
出版: (2018)

Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing
由: Mohd Yazid, Abu
出版: (2016)

Classification of skateboarding tricks by synthesizing transfer learning models and machine learning classifiers using different input signal transformations
由: Muhammad Amirul, Abdullah
出版: (2022)

Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends
由: Che Wan Mohd Noor, Che Wan Othman
出版: (2019)

Simulated Kalman Filter algorithms for solving optimization problems
由: Nor Hidayati, Abdul Aziz
出版: (2019)

Development of sustainability performance model for turning process by using neural network model
由: Hadi, Abdul Salaam
出版: (2020)

Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing
由: Mohd Azraai, Mohd Razman
出版: (2019)

Design and development of thermodynamics apparatus using design for manufacture and assembly (DFMA) methodology
由: Wan Ibrahim, Wan Abd. Rahman Assyahid
出版: (2006)

Physical behaviour of powder ceramic part using cold isostatic pressing (CIP) processes
由: Md. Ani, Sarizal
出版: (2006)

Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes
由: Idris, Siti Rabiatull Aisha
出版: (2008)

Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel
由: Shamsudin, Zuraidy
出版: (2007)

Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061
由: Ahamed, Ahmad Fauzi
出版: (2010)

Design of a curry puff making machine
由: Ibrahim, Imran
出版: (2010)

Software development of concurrent design for manufacturing process selection of plastic materials
由: Mohd. Yunus, Mohd. Yusri
出版: (2010)

Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA)
由: Mohamed Nazari, Munira
出版: (2010)

Computerized welding process selection and parameter determination
由: A. Aregia, Tarek Abdelhadi
出版: (2010)

Effect of process parameters on surface roughness produced by turning boring operation
由: Mohamed, Ahmad Dzia’Uddin
出版: (2010)

Investigation of laser cutting parameters on surface quality of stainless steel
由: Anuar, Azman
出版: (2010)

Performance evaluation of different process conditions when hard turning ASSAB 760
由: Azman, Azri
出版: (2010)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group