Fabrication of spectrally selective solar power absorber material via powder metallurgy process /

Fabrication of spectrally selective solar power absorber material via powder metallurgy process /

Saved in:

書目詳細資料
主要作者:	Mohd Zakuan Zabri (Author)
格式:	Thesis 圖書
語言:	English
出版:	2019.
主題:	Nanocomposites (Materials). Powder metallurgy. Solar energy.
在線閱讀:	http://studentsrepo.um.edu.my/11422/
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Fabrication and properties of magnesium-calcium alloy via powder metallurgy technique

Mechanical properties evaluation of tin-based powder metallurgical bearing components /
由: Mohd. Fadzil Jamaludin
出版: (2010)

Reinforcement of aluminum matrix by carbon nano tubes and nano alumina using powder metallurgy method
由: Ostovan, Farhad
出版: (2015)

Physical and wear properties of aluminium matrix composite reinforced with PSAC and slag fabricated via powder metallurgy
由: Zamri, Yusoff

Development of Sn-Cu filled activated carbon composite solder via powder metallurgy technique

Characterization and in-vitro activity of powder metallurgy magnesium-zinc/bioglass composite for biomedical applications

Performance evaluation of powder metallurgy tool electrodes in electrical discharge machining of hardened steel /
由: Nik Masmiati Nik Pa
出版: (2006)

Fabrication of SAC107 and Sn-0.7Cu lead free composite solder reinforced with Si3N4 via powder metallurgy route

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route

Characterization of optimal powder loading for metal injection moulding (MTM) / Muhammad Fatah @ Fadullah Abbas
由: Abbas, Muhammad Fatah @ Fadullah
出版: (2005)

Development and characterization of Co-Cr-Mo (F-75 alloy)/hydroxyapatite composites fabricated by powder metallurgy for biomedical applications
由: Nur Maizatul Shima, Adzali

Performance investigation of thermal energy storage with Phase Change Material (PCM) for solar water heater /
由: Hossain, Mohammed Mahfuz
出版: (2014)

Hybrid microwave sintering of zinc aluminum alloy /
由: Maisarah Lutfi
出版: (2012)

TiO2 loaded on reduced graphene oxide nanosheets as efficient electrodes in dye-sensitized solar cell /
由: Low Foo Wah
出版: (2018)

Physical properties and corrosion behaviour of Co-Cr-Ni alloy developed by powder metallurgy
由: Raudhah, Othman

The effect of nickel, cobalt and tin on the evolution of microstructural and mechanical properties of Al-Zn-Mg-Cu alloys (7000 series) via casting, powder metallurgy and friction stir processing techniques

Effect of particle size distribution on sintering of sub-micron alumina powder compacts /
由: Ma, Jan
出版: (1992)

Design, construction and testing of a dehumidification system using liquid absorbent solution of calcium chloride regenerated by solar energy /
由: Yang, Chao Ming
出版: (1982)

Design and testing of an absorber for a dehumidification system regenerated by solar energy /
由: Tan, Kah Hock
出版: (1981)

Corrosion behaviour on powder metallurgy aluminium matrix composite reinforced with alumina Saffil™ short fibres
由: Normah, Cheman

Electrical and thermal performance evaluation of solar photovoltaic/thermal (PV/T) air system /
由: Nurul Ataillah Abdul Rahim

Design, Fabrication And Experimental Evaluation Of Parabolic Trough Solar Concentrator At Bangi, Malaysia
由: Ibrahim Magaji Kotorkoshi

Microwave sintering of a tin base alloy /
由: Azrena Haji Abu Bakar
出版: (2005)

Propeller design for solar powered glider / Azlin Mohd Azmi
由: Mohd Azmi, Azlin
出版: (2002)

Desalination of reverse osmosis effluent using integrated solar pond with solar still system
由: Al-Musawi, Osamah Abdulhameed Kadhim
出版: (2016)

Potential of harnessing incident solar energy in building shading device for thermal application
由: Ng, Khai Mun
出版: (2018)

Design of single axis rotating solar panel for solar energy harnessing / Afif Qayyum Zaifullizan
由: Zaifullizan, Afif Qayyum
出版: (2018)

Preliminary design of lower power gained solar energy system in Malaysia / Mohd Norazlisham Mohd Ali.
由: Mohd Ali, Mohd Norazlisham
出版: (2009)

Thermomechanical modelling of powder compaction process /
由: Md. Mujibur Rahman
出版: (1998)

Analysis of sintered WC-TIC-6CO by using powder metallurgy process
由: Ahmad Shahbudin, Siti Nurshahmira
出版: (2019)

The effect of different cooling methods for power generation in parabolic solar dish concentrator using thermoelectric generator / Aneurin Nanggar Nyandang
由: Nyandang, Aneurin Nanggar
出版: (2022)

Colloidal processing and sintering of narrow-size-distribution submicron alumina /
由: Wong, Pomp Meng
出版: (1991)

Diamond particle distributed in cemented carbide /
由: Authayarat, Waratta
出版: (2007)

Solar System Courseware / Ahmad Danial Man Abisuffian
由: Man Abisuffian, Ahmad Danial
出版: (2023)

Powder compaction, finite element modelling and experimental validation /
由: Ahmad Kamal Ariffin Mohd. Ihsan
出版: (1995)

Availability of solar energy for natural lighting and electricity / Mohd Badrul Azha Johari
由: Johari, Mohd Badrul Azha
出版: (2002)

Process performance and characterization of microwave hybrid and conventional sintering methods on iron/silicon carbide
由: Daud, Siti Nurul Adura
出版: (2018)

Characterization of thin film aluminum doped zinc oxide for solar cell application / Danial Mohamed
由: Mohamed, Danial
出版: (2010)

An on-line photovoltaic monitoring system using the zigbee based wireless network /
由: Farihah Shariff
出版: (2015)

Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications
由: Mat Noor, Fazimah
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group