Post-weld heat treatment cracking in Rene 80 and effect of pre-weld heat treatment /

Post-weld heat treatment cracking in Rene 80 and effect of pre-weld heat treatment /

Saved in:

書目詳細資料
主要作者:	Yi, Jianzhang
格式:	Thesis 圖書
語言:	English
出版:	1998
主題:	Alloys > Weldability Alloys > Heat treatment Welded joints > Cracking
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Cyclic overageing pre-weld heat treatment for nickel-based superalloy-Rene 80 /
由: Liu, Ning
出版: (1998)

Microstructural studies of nickel-base brazes /
由: Tung, Siew Kong
出版: (1997)

Brazing of single crystal nickel with Ni-B-Si filler metal /
由: Wu, Haiming
出版: (1996)

Technical evaluation of shield metal arc welding process before and after post weld heat treatment /
由: Mohd Ansari Amir Hamzah

Characterization of heat affected zone for tig torch welded high strength low alloy steel with microalloying elements addition /
由: Abdullrhman, Musa Moh.H
出版: (2020)

Effect of heat treatment on hardness and wear properties of an aluminum alloy of motorcycle piston
由: Mohd Fizam, Hj. Zainon

Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub
由: Yaakub, Mohamad Yazman
出版: (2014)

The evolution of microstructures and properties due to materials tool interaction during friction stir welding of similar and dissimilar al and Cu alloys

Effect of the post weld heat treatment on microstructure and mechanical properties of friction stir welded/
由: Baghdadi, Amirhossein

Microstructural evolution and mechanical properties of magnesium alloy/austenitic stainless steel joints produced by resistance spot welding techniques /
由: Manladan, Sunusi Marwana
出版: (2017)

Electrodeposition and heat treatment studies of nickel-zinc alloys /
由: Chen, Tik Lung
出版: (1973)

Mechanical characterization of AA6061-T6 aluminum alloy friction stir and tungsten arc welded with and without post-weld heat treatment
由: Fadaeifard, Firouz
出版: (2016)

Pitting corrosion resistance with shielded metal arc welding and post weld heat treatment on duplex stainless steel weld overlay
由: Sim, Bernard Maxmillan
出版: (2019)

Friction stir welding of aluminium alloy (AA 5052): experimental and simulation /
由: Moshwan, Raza
出版: (2014)

The employment of advanced fiber laser technology to weld dissimilar materials : stainless steel and aluminum alloy using pre-placed powder-based activating flux and filler /
由: Ezazi, Mohammadamin
出版: (2015)

Effects of solution treatment temperature on the mechanical properties of commercial recycled aluminium alloy cylinder head (A319)
由: Murizam, Darus

Investigation on the mechanical properties and microstructure analysis of micro-resistance spot welding between stainless steel 316L and Tl-6AL-4V /
由: Muhammad Safwan Mohd. Mansor
出版: (2020)

A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor
由: Ahmad Manshor, Zulkifli
出版: (2006)

Kinetics of grain growth in 2024-T3 aluminium alloy /
由: Tuan Zaharinie Tuan Zahari
出版: (2009)

Welding of t-joint configuration between dissimilar metals using low powered fiber laser /
由: Shamini P. Janasekaran
出版: (2017)

Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints /
由: Tukur, Auwal Shamsu
出版: (2019)

Parametric investigation of heat transfer and fluid flow on laser micro-welding
由: Hozoorbakhsh, Asghar
出版: (2015)

A study on corrosion analysis of powder addition in al-sus 304 friction stir welding /
由: Muhaini Manshor
出版: (2015)

Effects of deformation and recrystallization on mechanical properties of 7075 aluminum alloy /
由: Tajally, Mohammad
出版: (2010)

Simulation of Fatigue Crack Growth in Friction Stir-Welded Joints of 2024-T351 Aluminum Alloy
由: Golestaneh, Amirreza Fahim
出版: (2008)

Cracking behaviour of concrete members reinforced with welded wire fabric /
由: Kasiraju, K.
出版: (1988)

Study on dissimilar material joining between polymer and metals by using laser welding and friction stir welding /
由: Farazila Yusof
出版: (2011)

A computational study of the heat and fluid flow phenomena in stationary GTA weld pool /
由: Ng, Sonny Hock Chuan
出版: (1993)

Resistance spot weld properties improvement through post weld impact treatment / Farizah Adliza Ghazali
由: Ghazali, Farizah Adliza
出版: (2018)

Study of the weld pool shape variations with the welding parameters for optimization under tig welding process
由: Liha, Lateng

Improved machinability of titanium alloy TI-6AL-4V through workpiece preheating /
由: Ginta, Turnad Lenggo
出版: (2010)

Effect of heat treatment on optical, elastic and thermal properties of silica borotellurite glass doped with manganese
由: Ismail, Zaitizila
出版: (2019)

Effect of cutting parameters on surface integrity in groove milling of Hastelloy-C276 using coated carbide end mills under dry and wet conditions
由: Abdulradha Al-Falahi, Muath Dheaa
出版: (2015)

Cracks in post-tensioned building structures /
由: Koh, Christina Bee Choo
出版: (1998)

Study on heat input for superalloy welding by using FEA simulation and experimental verification / Gege Nurfaizee Fadzil.
由: Fadzil, Gege Nurfaizee
出版: (2009)

Mechanical properties of nickel base wide gap brazed joint /
由: Wei, Dake
出版: (1993)

To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin
由: Benjamin, Rayner
出版: (2010)

Group behaviour of extended hollobolts (EHBs) in tension /
由: Mohd Fazaulnizam Shamsudin
出版: (2019)

To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
由: Mohd Yunos, Mohd Azne
出版: (2010)

Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin
由: Samsudin, Muhamad 'Afif
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group