Microstructure and properties of metal/ceramic composites based on Ti/TiC produced by combustion synthesis /

Microstructure and properties of metal/ceramic composites based on Ti/TiC produced by combustion synthesis /

محفوظ في:

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Farhoudi, Omid
التنسيق:	أطروحة كتاب
اللغة:	English
منشور في:	2007.
الموضوعات:	Ceramic metals. Composite materials. Ceramic powders. Metal powders. Combustion.
الوسوم:	إضافة وسم لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!

مواد مشابهة

Mechanically-induced defects in milled CdZnSe nanocrystalline powder
بواسطة: Bagudo, Ibrahim Muhammad
منشور في: (2016)

Diamond particle distributed in cemented carbide /
بواسطة: Authayarat, Waratta
منشور في: (2007)

Kajian ujikaji sifat-sifat mekanik campuran serbuk logam dengan plastik /
بواسطة: Syawaldi
منشور في: (1998)

A study of ceramic tool fracture in interrupted turning /
بواسطة: Husni
منشور في: (2010)

Performance evaluation of powder metallurgy tool electrodes in electrical discharge machining of hardened steel /
بواسطة: Nik Masmiati Nik Pa
منشور في: (2006)

Laser-induced etching of polycrystalline ceramic material Al[2]O[3]TiC /
بواسطة: Ye, Kaidong
منشور في: (1995)

In vitro evaluation of failure load of selected all-ceramic crowns /
بواسطة: Mohammed Al-Arwali, Ammar Mohammed
منشور في: (2016)

Microstructural and Dielectric Properties of (Ba,Nb)(Ti,Cu)O₃-(BNTC) and (Ba,Nb)(Ti,Sn)O₃-(BNTS) Ceramics
بواسطة: Keophilavong, Somsathith
منشور في: (2003)

Densification behaviour of forsterite ceramics /
بواسطة: Lee, Sara Kit Yee
منشور في: (2012)

Simultaneous fabrication of double layer ceramic composite /
بواسطة: Roudan, Malihah Amiri
منشور في: (2012)

Influence of heat treatment on microstructure, mechanical properties, and corrosion behaviour of LM6 reinforced with copper powder
بواسطة: Aljermi, Almukhtar IB. A.
منشور في: (2021)

Hard coating layer formation on plain carbon steel surfaces by powder preplacement and TIG torch melting techniques
بواسطة: Sarker, Dyuti
منشور في: (2010)

Effect of copper oxide on the properties of zirconia ceramic /
بواسطة: Kazemi, Maha

Directed melt oxidation of ceramic matrix composites : the effect of oxide dopants and particulate reinforcements /
بواسطة: Roslinda Shamsudin
منشور في: (1999)

Development of a test rig for ceramic-lined steel pipes production by self-propagating high-temperature synthesis (SHS) /
بواسطة: Mahmoodian, Reza
منشور في: (2009)

Characterization and dielectric properties of pure and er-substituted Bi₄Ti₃O₁₂ and Bi₅CrTi₃O₁₅ aurivillius ceramics
بواسطة: Wong, Yick Jeng
منشور في: (2018)

The effect of nickel, cobalt and tin on the evolution of microstructural and mechanical properties of Al-Zn-Mg-Cu alloys (7000 series) via casting, powder metallurgy and friction stir processing techniques

Dielectric Properties of Ceramic, CaCu3Ti4O12, Substituted with Sr or Ba
بواسطة: Che Ros, Fadhlina
منشور في: (2007)

Microstructure and dielectric properties of La1-x(Ba,Ca)x Mn0.40Ti0.60O3 (0.30 ≤ x ≤ 0.50) ceramic systems
بواسطة: Sinin, Aaliyawani Ezzerin
منشور في: (2015)

Microwave sintering of a tin base alloy /
بواسطة: Azrena Haji Abu Bakar
منشور في: (2005)

Electrical studies on MgO-P[2]O[5] materials sintered at 700[o]c /
بواسطة: Revathi Gunasekaran
منشور في: (2008)

Fabrication of zinc oxide low voltage varistor ceramics added Bi, Ti, Sb, and Al by conventional and solution coating method
بواسطة: Mohammadi, Raheleh
منشور في: (2017)

Characterization of optimal powder loading for metal injection moulding (MTM) / Muhammad Fatah @ Fadullah Abbas
بواسطة: Abbas, Muhammad Fatah @ Fadullah
منشور في: (2005)

Hydroxyapatite slip casting technique for ceramic design application / Norhidayah Md Zainuddin
بواسطة: Md Zainuddin, Norhidayah
منشور في: (2014)

The effect of copper powder addition on spreading characteristics and mechanical behaviour of Sn-Ag-Cu solder /
بواسطة: Angellia, Lian Dewi
منشور في: (2009)

Effects of Pr₆O₁₁ addition and sintering temperature on structural, optical and luminescence properties of Zn₂SiO₄ based glass ceramics
بواسطة: Mohamed, Nurzilla
منشور في: (2017)

Nd and Gd (a / ß ) - SiA1ON ceramics /
بواسطة: Mohammad Hafizuddin Jumali
منشور في: (1999)

Quality characteristics optimization and modelling of laser cutting of ceramics /
بواسطة: Parandoush, Pedram

Microstructural and electrical behavior of recycled soda lime silica glass doped ZnO-CoO based varistor ceramics
بواسطة: Ismail, Nur Quratul Aini
منشور في: (2020)

Development of Al-Cu-SiC[p] metal matrix composite for automotive applications /
بواسطة: Mohd Azlis Sani Md Jalil
منشور في: (2005)

Sintering behaviour and properties of graphene oxide-doped Y-TZP ceramics /
بواسطة: Khan, Mohammad Mohaymen
منشور في: (2017)

Physical and electrical properties of ceramic obtained from white rice husk ash and soda lime silica glass
بواسطة: Bateni, Nasim Heidari
منشور في: (2014)

Fabrication and characterization of microwave sintered PM Fe-Cr-Y2O3 composite
بواسطة: Marina, Marzuki

Characterization of thermally evaporated silver nanoparticles on graphene oxide coated substrate using hot-wire chemical vapour deposition /
بواسطة: Nurul Hazierah Kamaruddin
منشور في: (2018)

Effects of TI and Sr site substitutions on superconductivity, structure and excess conductivity of TISr2CaCu2O7-δ ceramics / Nurulhuda Ahmad
بواسطة: Ahmad, Nurulhuda
منشور في: (2010)

Powder compaction, finite element modelling and experimental validation /
بواسطة: Ahmad Kamal Ariffin Mohd. Ihsan
منشور في: (1995)

Thermomechanical modelling of powder compaction process /
بواسطة: Md. Mujibur Rahman
منشور في: (1998)

Electrical and microstructural properties of Nd₂O₃, Gd₂O₃ doped ZnO-V₂O₅-MnO₂-Nb₂O₅ based varistor ceramics
بواسطة: Isa, Nor Hasanah
منشور في: (2018)

Mechanical properties evaluation of tin-based powder metallurgical bearing components /
بواسطة: Mohd. Fadzil Jamaludin
منشور في: (2010)

Production of TiB[2]-TiC composite by Self-propagation High-Temperature Synthesis (SHS) /
بواسطة: Zavareh, Mitra Akhtari
منشور في: (2010)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group